When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We just got them yesterday. We don't have any pictures of them lit up. The front turn signals need an orange bulb. Side marker lights can use a clear bulb. On a car. Lamps in the back facing the rear must be red, except for orange turn signals. In the front lamps have to be clear or whit except for orange turn signals. It would kind of defeat the purpose if you put orange bulbs in the side clear lenses. But every state has different motor vehicle laws but they all mostly follow the US DOT regulations
Way better than using a heat gun on the original assembly and trying to soften up the black goo so you can pry the orange ones off. With these just insert the electrical connections from the original unit, pop in a nice LED bulb and you won't have a 1980s looking car
Hello, resurrecting this thread from the grave after scouring posts and websites looking for these clear side markers. Is anybody still offering them for a 951? Full set front/rear needed. Thank you in advance for any guidance!
I have been hunting for these too. I think I remember seeing them offered over-seas for $200/pair (which is WAY too much for me). It seems with the all of the 3 D printers out there, it shouldn't be an issue finding someone who can make them again. Post here if you find some before I do.
I have been hunting for these too. I think I remember seeing them offered over-seas for $200/pair (which is WAY too much for me). It seems with the all of the 3 D printers out there, it shouldn't be an issue finding someone who can make them again. Post here if you find some before I do.
Sounds like you found the same source I did, a Finnish site selling them for 199 euro per set. I agree, that's pretty stiff. Glad to see I'm not alone in my search. Hopefully someone who knows a thing or two about plastics and manufacturing will eventually stumble across our plight!
Woha, I actually got a brand new set of these with my project car, had no idea they were so valuable and hard to find. I actually found this thread just researching what they were worth. They went straight to my storage unit. I'll go look today, pull the part numbers, and take some better pictures.
I won't be using them. Do with that info what you may.
There is a place in the states (somewhere in the midwest?) that is either tooling up to do it or is already making them...don't remember where I saw the post (may have been pelican parts forum) but I saw it about a month ago
04-21-2017, 10:11 AM
Clear side markers
