Clear side markers
#1
Clear side markers
We have a batch of clear front and rear side markers available.
Price is 103 USD or 96€ per pair. VAT will be added to the price if you order to Europe.
We stock all 944 clear indicator lenses, so 944 na / 951 front and rear lenses are available too.
-9xx-parts
Price is 103 USD or 96€ per pair. VAT will be added to the price if you order to Europe.
We stock all 944 clear indicator lenses, so 944 na / 951 front and rear lenses are available too.
-9xx-parts
#3
We just got them yesterday. We don't have any pictures of them lit up. The front turn signals need an orange bulb. Side marker lights can use a clear bulb. On a car. Lamps in the back facing the rear must be red, except for orange turn signals. In the front lamps have to be clear or whit except for orange turn signals. It would kind of defeat the purpose if you put orange bulbs in the side clear lenses. But every state has different motor vehicle laws but they all mostly follow the US DOT regulations
#5
Way better than using a heat gun on the original assembly and trying to soften up the black goo so you can pry the orange ones off. With these just insert the electrical connections from the original unit, pop in a nice LED bulb and you won't have a 1980s looking car
#6
Last edited by 9xx-parts; 05-03-2017 at 05:04 PM.
Trending Topics
#8
Hello, resurrecting this thread from the grave after scouring posts and websites looking for these clear side markers. Is anybody still offering them for a 951? Full set front/rear needed. Thank you in advance for any guidance!
#9
Rennlist Member
I have been hunting for these too. I think I remember seeing them offered over-seas for $200/pair (which is WAY too much for me). It seems with the all of the 3 D printers out there, it shouldn't be an issue finding someone who can make them again. Post here if you find some before I do.
#10
I have been hunting for these too. I think I remember seeing them offered over-seas for $200/pair (which is WAY too much for me). It seems with the all of the 3 D printers out there, it shouldn't be an issue finding someone who can make them again. Post here if you find some before I do.
#11
Woha, I actually got a brand new set of these with my project car, had no idea they were so valuable and hard to find. I actually found this thread just researching what they were worth. They went straight to my storage unit. I'll go look today, pull the part numbers, and take some better pictures.
I won't be using them. Do with that info what you may.
I won't be using them. Do with that info what you may.
Last edited by 9five1; 03-23-2021 at 12:13 PM.
#13