RS-style door panels
#47
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
Join Date: May 2001
Location: Virtually Everywhere...
Posts: 4,820
Likes: 0
Received 5 Likes
on
5 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Very slow going. I am still in contact with the folks who may take this on, but they aren't moving at light speed. The biggest problem I think will be cost. Forms can be done for anything, but the general idea was to make this two-door reskin/kit cost less than $250. If the entire door panel must be molded, then folks demand matching colors, we've got too much to try and sell. The donor door program is a resounding "no way". I do this with the struts now and that's a little bit of nightmare all on its own. I really think the easiest way to get RS-style door panels is to refinish the originals. It doesn't appear to be too difficult with some thought and preparation. I'm going with either modified stock or aluminum panels to satisfy the ITS requirement.