Rennbay / Air Fuel Gauge and Clock Replacement / Weekend Sale
#16
Thread Starter
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2002
Posts: 6,527
Likes: 4
From: A great big building in the woods, FL.
what is the voltage range of the wide band O2 driver output? is it 0v-5v? Just drop me an email , support@rennbay.com , and we can work something out.
#17
Why no differing colors on the LEDs? I imagine the gauge is going to be pretty hard to read accurately while glancing over at WOT.
3 colors (lean, stioch,rich) seems to me to be pretty intuitive for this application?
3 colors (lean, stioch,rich) seems to me to be pretty intuitive for this application?
#18
Thread Starter
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2002
Posts: 6,527
Likes: 4
From: A great big building in the woods, FL.
The other solid colors and the mixed display will be available in the coming weeks. The solid bar is the easiest to read but the mixed display will be offered soon.
#21
Thread Starter
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2002
Posts: 6,527
Likes: 4
From: A great big building in the woods, FL.
Originally posted by led
Will there be a sale for the mixed display one?
Will there be a sale for the mixed display one?
#22
Travis...
Looks like a great product. I have an early dash, so here's a question/idea from a "back seat driver"...
Can some kind of tinted glass be placed over the display, so that it is not visible when the car is turned off? Does it protrude a little bit farther out than the original glass face of the clock, or is it recessed enough to put something between the face of the led and the opening?
Kevin
Looks like a great product. I have an early dash, so here's a question/idea from a "back seat driver"...
Can some kind of tinted glass be placed over the display, so that it is not visible when the car is turned off? Does it protrude a little bit farther out than the original glass face of the clock, or is it recessed enough to put something between the face of the led and the opening?
Kevin
#23
Thread Starter
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2002
Posts: 6,527
Likes: 4
From: A great big building in the woods, FL.
The face of the led bar sits even with where the face of the original glass used to be. If you wanted to trim just a touch off of the shroud you could slip a piece of tinted plastic film in there with no problems.
#24
Thread Starter
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2002
Posts: 6,527
Likes: 4
From: A great big building in the woods, FL.
For anyone else who has not seen the sale but wants to get in on it , it ends tomorrow night at 12pm est.
http://www.rennbay.com/airfuel.html
There is the link again. Its only posted here on rennlist and not on the main page in case anyone was looking there for it.
http://www.rennbay.com/airfuel.html
There is the link again. Its only posted here on rennlist and not on the main page in case anyone was looking there for it.
#25
Thread Starter
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2002
Posts: 6,527
Likes: 4
From: A great big building in the woods, FL.
Well, the sale was a success.
Everyone who ordered this weekend your gauges (and other products) shipped out today. I am sure everyone will be extremely happy with the quality and performance of the new product. Included in your package is basic installation instructions but if anyone needs a little more help please email me.
The standard pricing and gauge is now available on www.rennbay.com for anyone who missed the sale. We will soon be offering more options including a split color screen and different voltage ranges. Voltage ranges to come will be a 0v to 5v setup for reading your wide band O2 sensor outputs and a .70v to .95v for full throttle tuning. If anyone has any questions feel free to email me. We have basic boards pre made ready for any modifications you can come up with.
Everyone who ordered this weekend your gauges (and other products) shipped out today. I am sure everyone will be extremely happy with the quality and performance of the new product. Included in your package is basic installation instructions but if anyone needs a little more help please email me.
The standard pricing and gauge is now available on www.rennbay.com for anyone who missed the sale. We will soon be offering more options including a split color screen and different voltage ranges. Voltage ranges to come will be a 0v to 5v setup for reading your wide band O2 sensor outputs and a .70v to .95v for full throttle tuning. If anyone has any questions feel free to email me. We have basic boards pre made ready for any modifications you can come up with.
#27
Thread Starter
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2002
Posts: 6,527
Likes: 4
From: A great big building in the woods, FL.
I konw, I have just had so much going on right now. I have everything setup to order custom mixed displays but I just have not got around to it. Maybe I will get on that sometime in the next few weeks. I think they told me it was a 4 week lead time on the displays anyway so its still a ways off.