FS: parts from an '86 944 turbo, Tampa, FL
06-18-2016 | 03:31 AM
#32
Thread Starter
Rennlist Member
Joined: Apr 2006
Posts: 2,103
Likes: 17
From: Dallas, San Francisco, Tampa
Okay. Got your PM, as well.
As previously mentioned, the cylinders look relatively good from what I remember. In any case, will take some photos for you in a few weeks.
You understand this motor has not run in years. Again, FWIW, I wouldn't install this motor in any car without rebuilding it...at least main bearings, rod bearings, balance bearings, head gasket, and front seals.
For not much more, you could probably have the running motor Collin [call sign: ausgeflippt951] pulled out of his car at 130k. Suspect his is probably plug and play. Regardless, will put you first in line for this block. After you see photos and still want to move forward, we can work on the logistics.
As previously mentioned, the cylinders look relatively good from what I remember. In any case, will take some photos for you in a few weeks.
You understand this motor has not run in years. Again, FWIW, I wouldn't install this motor in any car without rebuilding it...at least main bearings, rod bearings, balance bearings, head gasket, and front seals.
For not much more, you could probably have the running motor Collin [call sign: ausgeflippt951] pulled out of his car at 130k. Suspect his is probably plug and play. Regardless, will put you first in line for this block. After you see photos and still want to move forward, we can work on the logistics.
06-20-2016 | 03:34 AM
#34
Thread Starter
Rennlist Member
Joined: Apr 2006
Posts: 2,103
Likes: 17
From: Dallas, San Francisco, Tampa
Plenty of those on this chassis. Will follow up with you in a few weeks when I'm back with the car.
06-21-2016 | 09:46 PM
#38
Track Day
Joined: Aug 2008
Posts: 15
Likes: 0
From: High Point, NC
06-24-2016 | 09:07 AM
#40
Thread Starter
Rennlist Member
Joined: Apr 2006
Posts: 2,103
Likes: 17
From: Dallas, San Francisco, Tampa
Have had a couple guys show interest via CL. Still have it, as I haven't been back with the car since early May.
If still interested in the assembly when I'm back with the car in a few weeks, will give you right of first refusal as a RL enthusiast.
If still interested in the assembly when I'm back with the car in a few weeks, will give you right of first refusal as a RL enthusiast.
06-24-2016 | 09:09 AM
#41
Thread Starter
Rennlist Member
Joined: Apr 2006
Posts: 2,103
Likes: 17
From: Dallas, San Francisco, Tampa
06-29-2016 | 07:22 PM
#42
Thread Starter
Rennlist Member
Joined: Apr 2006
Posts: 2,103
Likes: 17
From: Dallas, San Francisco, Tampa
Folks, will be back in town with the car the week of 18 Jul for the second round of packing/shipping parts.
Have followed up all inquiries via email, message, and/or text. If you have not yet provided one, please forward the best number to text for further coordination.
Have followed up all inquiries via email, message, and/or text. If you have not yet provided one, please forward the best number to text for further coordination.
07-18-2016 | 03:21 AM
#43
Thread Starter
Rennlist Member
Joined: Apr 2006
Posts: 2,103
Likes: 17
From: Dallas, San Francisco, Tampa
Folks, am back with the car for the second round of packing/shipping. Will be following up with everyone over the next couple days.
Blake, are you still interested in those fasteners [nuts, bolts, washers]? If so, please forward your shipping address via message/email and provide the best number to text.
Blake, are you still interested in those fasteners [nuts, bolts, washers]? If so, please forward your shipping address via message/email and provide the best number to text.
