Slightly OT: Stuff for Sale: Now with pictures
10-04-2003 | 05:40 PM
#1
Thread Starter
Nordschleife Master
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Slightly OT: Stuff for Sale: Now with pictures
I did have a lot of request for some pictures of the items for sale so here we go with some of the items....
First we have the 3 piece wheels finished with a polished lip and black centers. They are 8 inches in front and 9.5 in the back, and are set up for the late offset cars. They were assembled by HRE using thier hardware, although the centers are from a european company and are forged just like the ones HRE/Kinesis/Fikse use....
They weigh in at aprox 18 on the front and 20 lbs for the back.
I would be interested in partial trades for early offset wheels, but yould prefer to sell them strait up. 1500 shipped....
Along the same lines I have a set of tires for 16inch porsche fitments 225 front and 245 rears. These have good life left in them and are bridgstones IIRC, I'll have to double check what tire they are....
60 dollars
First we have the 3 piece wheels finished with a polished lip and black centers. They are 8 inches in front and 9.5 in the back, and are set up for the late offset cars. They were assembled by HRE using thier hardware, although the centers are from a european company and are forged just like the ones HRE/Kinesis/Fikse use....
They weigh in at aprox 18 on the front and 20 lbs for the back.
I would be interested in partial trades for early offset wheels, but yould prefer to sell them strait up. 1500 shipped....
Along the same lines I have a set of tires for 16inch porsche fitments 225 front and 245 rears. These have good life left in them and are bridgstones IIRC, I'll have to double check what tire they are....
60 dollars
10-04-2003 | 05:45 PM
#2
Thread Starter
Nordschleife Master
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Up next a freshly rebuilt 944 Turbo transmission, it was a non limited slip unit rebuilt with a phatom grip spider gear LSD. The work was done here in charlotte by Eurowerks, and the unit is running great with less than 1000 miles on it.
1400 dollars
Up next is the test pipe, factory cat was replaced with a 2.5 inch pipes, works well and has factory fit.
$100
And the ansa exhaust, I forgot the first time when I posed it that it was a resonator welded in infront of the exhaust....
$50
1400 dollars
Up next is the test pipe, factory cat was replaced with a 2.5 inch pipes, works well and has factory fit.
$100
And the ansa exhaust, I forgot the first time when I posed it that it was a resonator welded in infront of the exhaust....
$50
10-04-2003 | 05:47 PM
#3
Thread Starter
Nordschleife Master
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
And still in the garage with out pictures I have the complete 944 turbo brake set up
Black non sport seats
Front and rear koni sport shocks (adjustable, but worn out)
And the 924 Turbo hood......
Thanks for the bandwith......
Black non sport seats
Front and rear koni sport shocks (adjustable, but worn out)
And the 924 Turbo hood......
Thanks for the bandwith......
10-04-2003 | 08:21 PM
#4
Thread Starter
Nordschleife Master
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
And as a side note parts that interest me as trades for some of these are:
Big Reds (far fetched i know)
Early offset 17 inch race wheels (yep still far fetched)
eary offset 16's, just so I can roll the car around...... (so with tires)
Roll Bar (Odds are i'm going to have one welded in, but a bolt in one wouldn't be bad to have for now)
5 or 6 pt harnesses
Fiberglass hood
Lexan hatch
Quick release steering wheel
951 head (in good order)
Big Reds (far fetched i know)
Early offset 17 inch race wheels (yep still far fetched)
eary offset 16's, just so I can roll the car around...... (so with tires)
Roll Bar (Odds are i'm going to have one welded in, but a bolt in one wouldn't be bad to have for now)
5 or 6 pt harnesses
Fiberglass hood
Lexan hatch
Quick release steering wheel
951 head (in good order)
10-04-2003 | 08:40 PM
#6
Thread Starter
Nordschleife Master
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
I'll double check the type of tire that they are..... they are at my house where I don't have the internet so it may be until monday before I have that info on here....
but I would say at least 50% left, I'll measure them as well.....
but I would say at least 50% left, I'll measure them as well.....
Trending Topics
10-04-2003 | 08:54 PM
#9
Instructor
Joined: Aug 2003
Posts: 177
Likes: 0
From: Sidney, B.C.
I am seriously intrested in the ANSA exhaust. That setup bolts on to the cat? If it fits my 924 I will definatly take it, if not, I will still probaly take it. Email me at Minus@shaw.ca
10-04-2003 | 09:12 PM
#10
Addict
Rennlist Member
Rennlist Member
Joined: May 2001
Posts: 3,523
Likes: 33
From: Cary NC
I'm very interested in the exhaust and the tires. I have a roll bar, (the rennsport one) also. Get back to me when you get a chanse. Ahmet@rennlist.com
Ahmet
Ahmet
10-04-2003 | 10:14 PM
#11
Drifting
Joined: Jul 2002
Posts: 3,227
Likes: 0
From: kenosha WI
whats up with the exhaust? is it even any good or is this like stock for a turbo? if it sounds nice and i could get any power from it i would go for it. alhtough i would have to cut the mount off and put a 3 hole bracket on there to fit it on a N/A.
10-05-2003 | 05:07 AM
#13
Instructor
Joined: Oct 2001
Posts: 119
Likes: 0
From: Greensburg, Pa, USA
ian,
How much for the 924 turbo hood? shipped to pa? is this the same hood u have on youre red car? if so very interested. Please email me at nocturnal_breed@yahoo.com
How much for the 924 turbo hood? shipped to pa? is this the same hood u have on youre red car? if so very interested. Please email me at nocturnal_breed@yahoo.com
