PeteL

Original seller is sending me the correct bolts!

75ohm

Excellent!

gregeast

Sorry I didn't see this earlier, for future searchers, here's a complete parts list:

477 807 131 A - Bumper reinforcement (mount) X 2 w/o the rear tow point a (or x1 if using mount w/tow eye below) $42.50/ea from Sunset (circa 2011)
944 505 039 01 - Bumper reinforcement (mount) with receptacle for tow eye $182.40/ea from Sunsest (I bought a used one off of UK ebay for substantially less than this)

Hardware:
M10 x 60 X 2 - These attach the bumper to the mounts
Lock rings/washers

M8 x 20 X 4 - These attach the mounts to the body. You can reuse the old hardware for this
Lock rings/washers

PeteL

This is great info. I am having a bit of a problem getting the bumper all the way in so that it mates with the body. I need to take another look, see if something is blocking. But did you have any fitment issues?

gregeast

Hi Pete,

I vaguely remember a fair bit of wiggling and fiddling but I don't remember anything specific, sorry.

There is a bit of a gap between the bumper and the bodywork, this picture will give you an idea how mine fits:

docwyte

Hey Greg, we'll have to get together so we can swap kick plates and you can give me some direction on installing my rear euro bumper...