admiralkhole

All prices shipping not included. Parts are from an '83

Fans- $20



Oil separator- $20



Bracket- $20



Girdle- $20 (I have 2 of these)



Oil pan- $30 (I have two of these)



Intake manifold- $30



Intake from J boot to airbox- $50





Bellhousing- One for $40 (new bearings in clutch fork) one for $25. Both come with fork



Front plastics- $10 (I have two sets)



Covers- $20 for new, $10 for used (NEW ONE HAS SOLD)



Crank pulley- $10 new (SOLD)



Starter- $40 (SOLD)



Alternator- $25 (SOLD)



ALSO! I have some more misc parts just ask, mostly under hood parts.

DME- $40

Strut assemblies with springs, Sport option m456, threaded type- $30 each or $50 for both (SOLD)

Stock exhaust from the manifold to the exhaust tip- inquire if you wanted sections or the whole thing

14mm rear sway with hardware- $25

21.5mm front sway, missing one hanger- $35

I'll do both for $50

Also have a 924 23mm front sway with all hardware- $35

Cam tower with gear and lifters- $50 (SOLD)

I'm sure there's more I'm forgetting. I'm doing a v8 swap, so anything I do not need is for sale...just ask. Thanks!

Van

FYI, the girdles (and balance shaft covers) are stamped with a # that matches to the block they were machined with.

You really shouldn't use them with another block unless you have it align bored as an assembly (which is a somewhat expensive process).

admiralkhole

Hey thanks for the heads up! I have both blocks and covers to match them, guess I could just sell the blocks with all associated parts then. Thanks again!

admiralkhole

Bump

1tokar1

hey i know this post was posted a while ago but im writing you to see if you still have the oil separator please respond as soon as possible thank you.

admiralkhole

Yes sir, I have two to choose from.

Hollisterkiid92

Hey I know its really been a while since you posted, but I'm looking for a DME for my 84 944, do you Stoll have it available?

admiralkhole

PM's replied.

snb13

I'll take the new cam tower cover.

admiralkhole

It's gone to a new home, sorry.

I really need to update the thread, it's been a while since I made it.

F40LM

Hey I know its really been a while since you posted, but I'm looking for a DME for my 84 944, do you Stoll have it available?[/QUOTE]

If his is gone I have one from a '83 for sale. On aside note, it's always a little sad to see a early 944 getting eaten up not many left.

admiralkhole

My DME is still available.
And the car isn't getting eaten up, I did a v8 swap. I saved the car, it had been sitting for years after the previous owner had passed away. It's getting nothing but love and attention.

F40LM

Oops sorry let me hope the egg off my face. Missed the V8 swap part.

Great to hear, not only is it being pulled back from the dead but it will emerge one hell of a fast ride congrats.

Michael

admiralkhole

Thanks
And by selling these parts, I'm helping keep other early cars on the road