Garage sale. cheap early 944 stuff
14 Attachment(s)
All prices shipping not included. Parts are from an '83
Fans- $20 Attachment 1365516 Oil separator- $20 Attachment 1365517 Bracket- $20 Attachment 1365518 Girdle- $20 (I have 2 of these) Attachment 1365519 Oil pan- $30 (I have two of these) Attachment 1365520 Intake manifold- $30 Attachment 1365521 Intake from J boot to airbox- $50 Attachment 1365522 Attachment 1365523 Bellhousing- One for $40 (new bearings in clutch fork) one for $25. Both come with fork Attachment 1365524 Front plastics- $10 (I have two sets) Attachment 1365525 Covers- $20 for new, $10 for used (NEW ONE HAS SOLD) Attachment 1365526 Crank pulley- $10 new (SOLD) Attachment 1365527 Starter- $40 (SOLD) Attachment 1365528 Alternator- $25 (SOLD) Attachment 1365529 ALSO! I have some more misc parts just ask, mostly under hood parts. DME- $40 Strut assemblies with springs, Sport option m456, threaded type- $30 each or $50 for both (SOLD) Stock exhaust from the manifold to the exhaust tip- inquire if you wanted sections or the whole thing 14mm rear sway with hardware- $25 21.5mm front sway, missing one hanger- $35 I'll do both for $50 Also have a 924 23mm front sway with all hardware- $35 Cam tower with gear and lifters- $50 (SOLD) I'm sure there's more I'm forgetting. I'm doing a v8 swap, so anything I do not need is for sale...just ask. Thanks! |
FYI, the girdles (and balance shaft covers) are stamped with a # that matches to the block they were machined with.
You really shouldn't use them with another block unless you have it align bored as an assembly (which is a somewhat expensive process). |
Hey thanks for the heads up! I have both blocks and covers to match them, guess I could just sell the blocks with all associated parts then. Thanks again!
|
Bump
|
Oil Seperator
hey i know this post was posted a while ago but im writing you to see if you still have the oil separator please respond as soon as possible thank you.
|
Yes sir, I have two to choose from.
|
Originally Posted by admiralkhole:10301819
All prices shipping not included. Parts are from an '83
Fans- $20 https://i.imgur.com/4X0NSKz.jpg Oil separator- $20 https://i.imgur.com/d40x3Rx.jpg Bracket- $20 https://i.imgur.com/a2GBb3X.jpg Girdle- $20 (I have 2 of these) https://i.imgur.com/wDEFedi.jpg Oil pan- $30 (I have two of these) https://i.imgur.com/VBpg4fS.jpg Intake manifold- $30 https://i.imgur.com/qRET9gR.jpg Intake from J boot to airbox- $50 https://i.imgur.com/yKrQ1B1.jpg https://i.imgur.com/Jn5yIqa.jpg Bellhousing- One for $40 (new bearings in clutch fork) one for $25. Both come with fork https://i.imgur.com/mmPjUha.jpg Front plastics- $10 (I have two sets) https://i.imgur.com/pkcnL7W.jpg Covers- $20 for new, $10 for used https://i.imgur.com/EnqDe2b.jpg Crank pulley- $10 new https://i.imgur.com/YYGBV7G.jpg Starter- $40 https://i.imgur.com/iIboCZf.jpg Alternator- $25 https://i.imgur.com/r6Ya6Px.jpg ALSO! I have some more misc parts just ask, mostly under hood parts. DME- $40 Strut assemblies with springs, Sport option m456, threaded type- $30 each or $50 for both Stock exhaust from the manifold to the exhaust tip- inquire if you wanted sections or the whole thing 14mm rear sway with hardware- $25 21.5mm front sway, missing one hanger- $35 I'll do both for $50 Also have a 924 23mm front sway with all hardware- $35 Cam tower with gear and lifters- $50 I'm sure there's more I'm forgetting. I'm doing a v8 swap, so anything I do not need is for sale...just ask. Thanks! Hey I know its really been a while since you posted, but I'm looking for a DME for my 84 944, do you Stoll have it available? |
PM's replied.
|
I'll take the new cam tower cover.
|
Originally Posted by snb13
(Post 10394884)
I'll take the new cam tower cover.
I really need to update the thread, it's been a while since I made it. |
Hey I know its really been a while since you posted, but I'm looking for a DME for my 84 944, do you Stoll have it available?[/QUOTE]
If his is gone I have one from a '83 for sale. On aside note, it's always a little sad to see a early 944 getting eaten up not many left. |
My DME is still available.
And the car isn't getting eaten up, I did a v8 swap. I saved the car, it had been sitting for years after the previous owner had passed away. It's getting nothing but love and attention. |
Originally Posted by admiralkhole
(Post 10395482)
My DME is still available.
And the car isn't getting eaten up, I did a v8 swap. I saved the car, it had been sitting for years after the previous owner had passed away. It's getting nothing but love and attention. Great to hear, not only is it being pulled back from the dead but it will emerge one hell of a fast ride congrats. Michael |
Thanks :thumbup:
And by selling these parts, I'm helping keep other early cars on the road ;) |
All times are GMT -3. The time now is 05:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands