*****Gauge pod ordering process starting today...I need a concensus on what size*****
08-10-2001, 11:57 AM
#1
Rennlist Member
Thread Starter
Join Date: May 2001
Location: Crofton, MD
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
*****Gauge pod ordering process starting today...I need a concensus on what size*****
I have tallied 21 orders for the gaugepods, which is enough.
Most people seem to want the 2 gaugepod pillars, and I think we are limited to a run of EITHER 2 or 3, so I think we will do 2.
As far as the gaugesize is concerned...I just need to find out what size everyone wants. I think the pods are sized for 2" - 2 1/16" gauges, but we may be able to get another size if there is a majority of people wanting it...
So is everyone cool with 2" - 2 1/16" gaugepods? Respond here.
Most people seem to want the 2 gaugepod pillars, and I think we are limited to a run of EITHER 2 or 3, so I think we will do 2.
As far as the gaugesize is concerned...I just need to find out what size everyone wants. I think the pods are sized for 2" - 2 1/16" gauges, but we may be able to get another size if there is a majority of people wanting it...
So is everyone cool with 2" - 2 1/16" gaugepods? Respond here.
08-10-2001, 02:45 PM
#5
Addict
Rennlist Member
Rennlist Member
(2) 2 1/16" pods would work for me.
I have a few questions that I have not yet seen voiced, but let me preface it by saying that I am grateful for the initiative and work that you guys are doing:
* Will we be able to make a decision as to if we want one after the prototype has been mocked-up and a picture posted to the site?
* Is this to be a one time run or will we be able to order one at will in a year or so?
At this time I have the need for only one extra gauge and I do not know what I would put in the other pod. (I am finalizing the mounting of my one gauge close to the far-left driver’s side vent, near the fog light switch.)
If I need to make a decision now, I will order one and sell it on E-bay if I never use it.
I have a few questions that I have not yet seen voiced, but let me preface it by saying that I am grateful for the initiative and work that you guys are doing:
* Will we be able to make a decision as to if we want one after the prototype has been mocked-up and a picture posted to the site?
* Is this to be a one time run or will we be able to order one at will in a year or so?
At this time I have the need for only one extra gauge and I do not know what I would put in the other pod. (I am finalizing the mounting of my one gauge close to the far-left driver’s side vent, near the fog light switch.)
If I need to make a decision now, I will order one and sell it on E-bay if I never use it.
Trending Topics
08-10-2001, 03:38 PM
#8
Drifting
nope, but autometer has a couple of lines with type fonts VERY CLOSE to the Porsche stock VDO gauges. Instead of white-faced, you may want to check out autometer's Ultra-lite aluminum-faced gauges - that's what I'm doing for boost - and like I said, the numbers match what is already there...
I am also going autometer for the A/F ratio gauge, but will go black with that, paint the bezel black, and tint the glass on the gauge to knock the LEDs down a little bit - it should be very subtle, and hopefully won't compete with the alum. faced boost gauge...
I am also going autometer for the A/F ratio gauge, but will go black with that, paint the bezel black, and tint the glass on the gauge to knock the LEDs down a little bit - it should be very subtle, and hopefully won't compete with the alum. faced boost gauge...
