Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

Everything is $20 sale - Pickup Only (Charlotte, NC) - Mostly 924S Parts

Thread Tools
 
Search this Thread
 
Old 12-11-2012 | 12:37 PM
  #1  
ian's Avatar
ian
Thread Starter
Nordschleife Master
 
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Default Everything is $20 sale - Pickup Only (Charlotte, NC) - Mostly 924S Parts

In an effort to clean some stuff out of the garage before the new year, I figured I would have $20 sale. I am going to keep this to local pickup in Charlotte, NC only as I have spent far too much time at FedEx over the last month.

The list of parts available for $20, and I am sure there is more stuff available I just need to catalog everything still. If you want to make me an offer on multiple things, odds are I will be willing to deal.


- fire exstinguisher mount
- 924/44 header panel, not perfect but workable
- 944 rear bumper w/ shocks
- 944 Power Mirrors (passenger side needs a new motor, glass is ok)
- Windows (door / quarter panel) - I have two sets of front door glass, and one set of 1/4 panel glass
- 15x6 Phone Dials x2
- Front Brakes
- Rear Brakes
- Brake Master Cylinder
- Clutch Slave Cylinder
- Driver Seat
- Passenger Seat
- Back Seats
- Throttle Body w/ TPS
- 924S / 944 Intake Manifold Painted Black
- 924S / 944 AFM
- 18mm Rear Sway Bar
- 24mm Front Sway Bar (have two of these)
- Alternator (worked when pulled)
- Headlights including buckets and covers
- Radiator Fans
- Tail Lights
- 951 stock springs
- 951 stock torsion bars
- Engine Crossmember
- Hatch Release Motor
- Metal Center Cap Sets

Sold Stuff
- Water Pump Used To Test Old Motor, Zero Miles, 30 min of run time
- 924S Oil Pressure Gauge
- 924S Clock
- Engine Wiring Harness
- 4 spoke steering wheel
- AC Compressor For Rebuild






































Last edited by ian; 01-07-2013 at 10:34 AM. Reason: edited title
Old 12-11-2012 | 12:43 PM
  #2  
86 951 Driver's Avatar
86 951 Driver
Race Car
 
Joined: Oct 2002
Posts: 3,638
Likes: 1
From: KC, MO
Default

What kind of shape is the steering wheel in?
Old 12-11-2012 | 12:46 PM
  #3  
ian's Avatar
ian
Thread Starter
Nordschleife Master
 
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Default

It needs to be recovered
Old 12-13-2012 | 05:03 PM
  #4  
ian's Avatar
ian
Thread Starter
Nordschleife Master
 
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Default

Added pictures of most stuff, and added a couple of items.
Old 12-13-2012 | 06:01 PM
  #5  
86 951 Driver's Avatar
86 951 Driver
Race Car
 
Joined: Oct 2002
Posts: 3,638
Likes: 1
From: KC, MO
Default

Engine undertray for a 951?
Old 12-13-2012 | 06:02 PM
  #6  
ian's Avatar
ian
Thread Starter
Nordschleife Master
 
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Default

Not for sale.
Old 12-14-2012 | 12:12 PM
  #7  
turbo944's Avatar
turbo944
Three Wheelin'
 
Joined: Jan 2003
Posts: 1,717
Likes: 1
From: Burlington, NC
Default

Dang...wish you were a little closer! Used to live in Salisbury and it wasn't so bad, but from Burlington I start running into gas/mileage being more expensive than shipping...although a nice drive in the 951 wouldn't be an all bad thing!
Old 12-14-2012 | 12:15 PM
  #8  
ECS Tuning's Avatar
ECS Tuning
Former Vendor
 
Joined: Mar 2012
Posts: 5,626
Likes: 12
From: Wadsworth, OH
Default

Now this is a deal !! Good luck with the sale
Old 12-14-2012 | 12:21 PM
  #9  
ian's Avatar
ian
Thread Starter
Nordschleife Master
 
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Default

It is a bit of a drive from Burlington, but you could always spice things up and go through albemarle, the roads are a lot more interesting on that route.

What parts are you interested in? One of my friends from Raleigh comes down once every couple of months, and depending on what you wanted I could send some stuff back with him. Only problem with that plan, I have no idea when he will show up again.
Old 12-14-2012 | 12:40 PM
  #10  
CyCloNe!'s Avatar
CyCloNe!
Rennlist Member
 
Joined: Dec 2009
Posts: 4,124
Likes: 124
From: Chesapeake, VA 23322
Default

condition of driver and passenger seats?
Old 12-14-2012 | 12:46 PM
  #11  
ian's Avatar
ian
Thread Starter
Nordschleife Master
 
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Default

Seats are in decent shape, I can take close up pictures if needed. They are a bit dirty, but at least they are not torn. The seat rails have seen better days due to some rust, so they would need to be replaced before use (passenger side was a bear to move when I pulled the seats).

Old 12-14-2012 | 01:30 PM
  #12  
turbo944's Avatar
turbo944
Three Wheelin'
 
Joined: Jan 2003
Posts: 1,717
Likes: 1
From: Burlington, NC
Default

Ah, I've been on a few roads through the area, but traveling for a living means I don't get to spend as much time in the area as I would like for exploring! Have to try that out sometime! Grew up and lived in East TN and have done lots of trips up in the mountains there...between Asheville and the Tail of the Dragon (which I didn't care for) there are some really great 944 Turbo type of roads...and NOBODY there!

No worries on the timing...they aren't OMG gotta have 'em today type things.

Tail lights that are in nice condition (got one leaking and may wanna try clears and don't wanna bust mine up--still like the amber too) and the 951 AFM (depends on the mileage/condition--my car has just over 200,000 on it and hoping to do an M-Tune next year and $20 is a good price to test a different one to see if my occasional hesitation goes away when cold).

If you hear anything soon let me know!

Thanks!

Originally Posted by ian
It is a bit of a drive from Burlington, but you could always spice things up and go through albemarle, the roads are a lot more interesting on that route.

What parts are you interested in? One of my friends from Raleigh comes down once every couple of months, and depending on what you wanted I could send some stuff back with him. Only problem with that plan, I have no idea when he will show up again.
Old 12-14-2012 | 01:30 PM
  #13  
sparkyman215's Avatar
sparkyman215
Instructor
 
Joined: Dec 2005
Posts: 154
Likes: 0
From: Charlotte, NC
Default

Ian, I could use the windshield. Any cracks in it? I am guessing it is from an early car without the antenna in it, correct?
Old 12-14-2012 | 02:53 PM
  #14  
ian's Avatar
ian
Thread Starter
Nordschleife Master
 
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Default

Windshield has no cracks, and yes it is the correct one for an early car without antenna.
Old 12-15-2012 | 05:23 PM
  #15  
ian's Avatar
ian
Thread Starter
Nordschleife Master
 
Joined: Jun 2001
Posts: 5,700
Likes: 72
From: Charlotte, NC
Default

Wanted to add a link to some other garage cleaning I am doing:


Early Offset Wheels For Sale


Quick Reply: Everything is $20 sale - Pickup Only (Charlotte, NC) - Mostly 924S Parts



All times are GMT -3. The time now is 08:24 AM.