View Poll Results: Dual gauges pod, What do you thing?
That’s cool, would buy
7
70.00%
That’s dumb, would never buy
3
30.00%
Voters: 10. You may not vote on this poll
Dual gauges pod, What do you thing?
10-28-2012, 05:50 PM
#1
Racer
Thread Starter
Join Date: Dec 2011
Location: Ontario, Canada
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Dual gauges pod, What do you think?
{edit} I mean "think" not "thing" {edit}
I would like to get your opinions and interest on a little something I’m working on.
In fact, I started working on this last winter and then put it a side because I was to busy with the 924/944 GTS headlight.
I tried to replicate the shape of the factory one below the grill.
If there is enough interest, I could spend some time on this during winter and try to have it ready for next spring.
It would only be available in black and go for around $65 shipped to CAN and US.
This is only a rough estimate and not a confirm price.
Let me know what you thing, beside the little trimming problem I had
Thanks
I would like to get your opinions and interest on a little something I’m working on.
In fact, I started working on this last winter and then put it a side because I was to busy with the 924/944 GTS headlight.
I tried to replicate the shape of the factory one below the grill.
If there is enough interest, I could spend some time on this during winter and try to have it ready for next spring.
It would only be available in black and go for around $65 shipped to CAN and US.
This is only a rough estimate and not a confirm price.
Let me know what you thing, beside the little trimming problem I had
Thanks
Last edited by 924-76; 11-04-2012 at 02:17 PM.
10-28-2012, 06:43 PM
#3
Racer
Join Date: Oct 2008
Location: Tucson, Az
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
That looks great! If I had an early car, I would be all over it.
Now, get back to work on the Carerra GT buckets for the 951! MUSH! MUSH! (whip cracking in background)
Jeff
Now, get back to work on the Carerra GT buckets for the 951! MUSH! MUSH! (whip cracking in background)
Jeff
10-28-2012, 06:54 PM
#4
Racer
Thread Starter
Join Date: Dec 2011
Location: Ontario, Canada
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
11-02-2012, 05:45 PM
#8
Racer
Thread Starter
Join Date: Dec 2011
Location: Ontario, Canada
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
I still have to work on one of the mould as I’m not 100% happy with the fitment but it’s getting there.
If this come trough, you could order one or both pods uncut, I left one pod uncut to show you what it looks like. This was point out to me by a member.
This way you could mount a manual boost controller, shift light, different size gauge, etc…
If this come trough, you could order one or both pods uncut, I left one pod uncut to show you what it looks like. This was point out to me by a member.
This way you could mount a manual boost controller, shift light, different size gauge, etc…
11-03-2012, 08:42 AM
#11
Racer
Thread Starter
Join Date: Dec 2011
Location: Ontario, Canada
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
11-04-2012, 09:16 AM
#15
Racer
Thread Starter
Join Date: Dec 2011
Location: Ontario, Canada
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
This thing might be ready before spring 
I still have some tuning to do on the moulds, but now the bottom of the pod reaches the edge of the opening.
Just to be clear, only the pod will be for sale, gauges will not be included
Thanks
Have you notice the time on the clock?
I still have some tuning to do on the moulds, but now the bottom of the pod reaches the edge of the opening.
Just to be clear, only the pod will be for sale, gauges will not be included
Thanks
Have you notice the time on the clock?