Parting out 88 924S Engine
#1
Nordschleife Master
Thread Starter
Parting out 88 924S
After a bit of a delay I started pulling the 88 924S engine apart, will keep updating the list as things come out of the car. Things that are for sale:
- 88 DME (working when pulled) - Sold
- Short Block - Sold
- Cam housing w/ cam - Sold
- Head (complete) - Sold
- Exhaust manifolds - Sold
- Wiring harness - Sold
- Throttle body w/ TPS - $50
- AFM - $50
- Intake manifold (painted black) - $50 -
Prices OBO
Also for sale from this car:
- 924 Fenders - $50
- 15x6 Phone dials x2 - $50
- 88 DME (working when pulled) - Sold
- Short Block - Sold
- Cam housing w/ cam - Sold
- Head (complete) - Sold
- Exhaust manifolds - Sold
- Wiring harness - Sold
- Throttle body w/ TPS - $50
- AFM - $50
- Intake manifold (painted black) - $50 -
Prices OBO
Also for sale from this car:
- 924 Fenders - $50
- 15x6 Phone dials x2 - $50
Last edited by ian; 01-07-2013 at 10:30 AM.
#3
Nordschleife Master
Thread Starter
I had wanted to get the 924S into driving shape so that it could be driven around while I worked on the long term project of turning it into a a 924 GTS tribute, but I had a few things happen that dictated a change of plan. The short version of the story is that I ended up using some parts from the 924S to put the 10 year dormant 951 back on the road.
#4
Hi..I'm currently building a Carrera GT out of my 88 924S, I could use a spare DME..and that painted cam housing and intake look great painted black..my CGT is going to be black so I may be really interested in those other parts..By chance did your 924S have any of the switches in the center console..mirror change over, headlight washer, rear wiper..? I am installing those options on my car and need the wiring from the switches to main harness..or at least be able to see how they connect..thanks Jeff..will send you a pvt msg
my email usairbearphx@yahoo.com
I work for USAirways so I could come and pick up in Charlotte !!! based/live in Phoenix
my email usairbearphx@yahoo.com
I work for USAirways so I could come and pick up in Charlotte !!! based/live in Phoenix
#6
Drifting
Interested in the crank, pistons and conn rods and oil pump.
Also interested in the fender.
PM me cost shipped to 78744
ChumpCar needs back-up engine rebuilt.
thx,
Mike
Also interested in the fender.
PM me cost shipped to 78744
ChumpCar needs back-up engine rebuilt.
thx,
Mike
Trending Topics
#8
Nordschleife Master
Thread Starter
Other than the fender I will work up a cost for the parts and shipping for that stuff once I get it out of the car. I priced the 924 fenders cheap in the hope that someone local will snag them. Shipping such a bulky item isn't something I want to do at this point.
The DME and Pistons both seem to be very hot items, chalk it up to the popularity of spec racing the '44.
#11
Nordschleife Master
Thread Starter
#14
I have an 88 924S that is in decent shape but the wiring harness was hacked apart by the PO while trying to trouble shoot a fried ECU problem. When you get the harness out and have a price PM me I could use a fresh one if the one you have is in good shape.