88 944s wont move making worst case plans
04-21-2012, 09:58 AM
Track Day
Thread Starter
Join Date: Mar 2012
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
no doubt 1st was cv it was in pcs ...***** all over. when rain stops will pulll next one. So there is no specific oreintation?
04-22-2012, 09:11 PM
Track Day
Thread Starter
Join Date: Mar 2012
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Pulled it found the ring that holds the ***** had popped off around the inned hub. Time for 1 more replacement.
04-22-2012, 09:19 PM
Rennlist Member
Join Date: Dec 2008
Location: NM (ABQ)
Posts: 2,238
Likes: 0
Check the transaxle mount, it may be so sloppy that it's swinging side to side, putting stress on the CV's. Did the 2nd one break after a short drive?
04-23-2012, 08:39 AM
Track Day
Thread Starter
Join Date: Mar 2012
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
944Ross
Check the transaxle mount, it may be so sloppy that it's swinging side to side, putting stress on the CV's. Did the 2nd one break after a short drive?
Nope in the driveway when i 1st let the clutch out
04-23-2012, 11:34 AM
Race Director
Join Date: Aug 2002
Location: Phoenix, Az
Posts: 17,643
Likes: 0
The CV joints should not just break like that. With the car in the air make sure gearbox is turning properly.
944 ,
996 ,
broken ,
car ,
coupler ,
crankshaft ,
drive ,
gear ,
half ,
makes ,
move ,
putting ,
shaft ,
sound ,
splin ,
wont