Pics of 1987 944"S" Engine Bay?
#31
SPAM addict
Rennlist Member
Rennlist Member
#32
SPAM addict
Rennlist Member
Rennlist Member
Hey there 944 board! I believe this may very well be my first post on here?
Recently, I've acquired a "948" project which began life as a 1987 944S - I took out the V-8 and crazy clutch setup and have purchased a healthy '87 "S" motor. I intend to turn everything back factory, with the exception of the AC system.
Does anyone know of a good source for detailed pics of an earlier "S" engine bay that I could use for comparison? I have a good 3-4 months to get this together as it's been sold to a fellow Rennlister up in Maine who is absolutely taken by the paint job on the car and the meticulous work I've done thus far in the interior and such.
Any help you can give would be great.
ALSO, there are 17" "Turbo 3.6 Speedline" look-a-likes on the car, they are not factory wheels that I can tell...and all I can find is info. on 18" Turbo 3.6 wheels by RH. I'd like to buy two outer rim halves due to "curbing".
If anyone is able to help me out with finding the manufacturer of these that'd be great as well, the new owner loves the wheels (they ARE cool) and one of my tasks is to get 'em fixed.
...I will pull them off the car to see if there is any info. on them here shortly.
Recently, I've acquired a "948" project which began life as a 1987 944S - I took out the V-8 and crazy clutch setup and have purchased a healthy '87 "S" motor. I intend to turn everything back factory, with the exception of the AC system.
Does anyone know of a good source for detailed pics of an earlier "S" engine bay that I could use for comparison? I have a good 3-4 months to get this together as it's been sold to a fellow Rennlister up in Maine who is absolutely taken by the paint job on the car and the meticulous work I've done thus far in the interior and such.
Any help you can give would be great.
ALSO, there are 17" "Turbo 3.6 Speedline" look-a-likes on the car, they are not factory wheels that I can tell...and all I can find is info. on 18" Turbo 3.6 wheels by RH. I'd like to buy two outer rim halves due to "curbing".
If anyone is able to help me out with finding the manufacturer of these that'd be great as well, the new owner loves the wheels (they ARE cool) and one of my tasks is to get 'em fixed.
...I will pull them off the car to see if there is any info. on them here shortly.
#33
SPAM addict
Rennlist Member
Rennlist Member
#36
SPAM addict
Rennlist Member
Rennlist Member
#39
Race Car
Thread Starter
OK, NO word from PJBurgess in almost a month - oh well.
Will likely start a new thread as I need some parts now that I've picked up the used engine...
Will likely start a new thread as I need some parts now that I've picked up the used engine...
#40
SPAM addict
Rennlist Member
Rennlist Member