my Orange SRS controller does not have ROUND 7 PIN connecter . its a FLAT 6 PIN connecter sure as sh--! installed non air bag 930 CS steering wheel and now of course the " ! " light is on as well as air bag and seat belt light .
Searchs all talk about either snipping wires 5 & 7 or jumpering wires 3 & 4 at the controller ... anyone else run into this ... Im looking right at it . Its a FLAT 6 pin connecter NOT ROUND 7 PIN . ( pulled glove box for easy acess)
BTW ERNIE tried the 3 ohm resister ... still have warning lights

 

forgot to mention , car is 1990 944 s2 cab ... ive got pins 3 & 4 jumperd just waiting for a confirmation before i hook up battery and give it a try . maybe porsche changed the connectors because one was " unused " according to what im reading on 7 pin.

 

Hello ! there still having problems,after having the 3ohm resistor on for 4 months something went haywire & the "!" & air bag ligth came back on ,so what I did is put a jumper in between 3 & 4 (femal side) of the flat 6 pins connector work A1, of course I lost the passenger air bag (I don't care) ,no more ligth.Do not snip wires 5 & 7 just in case you'll want to put things back to normal in the future.The most difficult apart from( trying to turn yourself into Gumby ) is to try to secure the jumper in so it won't wiggle free ,if it does your car won't start or migth quite on you while driving .So make darn sure it's secure, once it is put a tie-wrap througth one of the hole at the end of the flat connector & fasten it up there somewhere. Use 12 gauges wire for the jumper.

 

Very good Ernie ...that is just how I have it thanks man

 

No problems it should be fool proof, but like said make sure of that jumper.