Part number for block coolant drain plug and seal
01-23-2011, 08:00 PM
#1
Rennlist Member
Thread Starter
Part number for block coolant drain plug and seal
Hi Guys,
Can anyone provide the PN for both of these? Apparently one of the shops that touched my 85.5 over the years decided that wedging a bolt with the wrong thread halfway in and leaving it at that was "OK"
While the head is off for a gasket, and all the while I am there stuff is getting done, I want to fix this.
I am looking through the PET and cant seem to locate it.
Can anyone provide the PN for both of these? Apparently one of the shops that touched my 85.5 over the years decided that wedging a bolt with the wrong thread halfway in and leaving it at that was "OK"
While the head is off for a gasket, and all the while I am there stuff is getting done, I want to fix this.
I am looking through the PET and cant seem to locate it.
06-10-2015, 05:27 PM
#2
AutoX
Join Date: Jan 2011
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Ancient thread I know, but in case anyone in the future does a search as I did, now there will be a reply. Engine block diagram in PET, items 24 and 25. The plug is just a simple 8 x 1.25 x 16 bolt, and the seal dimensions are 8 x 13. Part numbers 900 075 087 02 and 900 123 105 30 respectively. I hope this helps someone someday.
