Parting out a 1993 968
#61
Rennlist Member
Thread Starter
#63
Rennlist Member
Thread Starter
Hatch: $500 + shipping (I would prefer a local buyer, but I am willing to ship)
The hatch has no damage from the accident. The two side trim pieces are loose and will need to be glued to the fasteners. The window interior shading around the edges is peeling. There is one spot on the passenger corner where there is a chip out of the paint/finish. Also, the black paint is faded somewhat.
IMG]http://i258.photobucket.com/albums/hh265/gwgjr33/hatch/PICT0337.jpg[/IMG]
[IMG]
The hatch has no damage from the accident. The two side trim pieces are loose and will need to be glued to the fasteners. The window interior shading around the edges is peeling. There is one spot on the passenger corner where there is a chip out of the paint/finish. Also, the black paint is faded somewhat.
IMG]http://i258.photobucket.com/albums/hh265/gwgjr33/hatch/PICT0337.jpg[/IMG]
[IMG]
Last edited by EspritS4s; 10-23-2010 at 10:13 AM.
#65
Rennlist Member
Thread Starter
#68
Rennlist Member
Hi Gary,
I'm interested in:
- Central locking module (small black box clasped to the steering column).
- Climate control unit
- Center console trim, if it's Classic Gray. This is the vinyl trim that surrounds the gearshift and cassette box.
I'm interested in:
- Central locking module (small black box clasped to the steering column).
- Climate control unit
- Center console trim, if it's Classic Gray. This is the vinyl trim that surrounds the gearshift and cassette box.
#69
Rennlist Member
I'm interested in the air box? Ship to my USA address.
#70
Rennlist Member
Thread Starter
Luis,
I'll get back to you on this.
I'll get back to you on this.
#71
Rennlist Member
Thread Starter
#72
Rennlist Member
#75
Rennlist Member
Thread Starter