Splitter on Aftermarket Bumper
04-07-2002, 07:18 PM
#2
Race Car
The splitter sits in between the front bumper and the lower tray. The tray is held to the bumper with 10-12 philips screws and are kept from pulling out with some universal nuts that clip onto the underside of the bumper. I'm guessing if the bumper has holes for the lower tray to mount and you can get more of those nuts then you can add a splitter no problem.
04-08-2002, 02:45 AM
#3
Three Wheelin'
Thread Starter
Join Date: Mar 2002
Location: San Diego, Ca
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
bolting it up isnt the problem, the SIZE is what im wondering.. i just want to know if the bottom CURVE of the bumper would be the same...
SHAUN
SHAUN
04-08-2002, 09:39 AM
#4
Race Director
I am wondering this exact same thing. I want to put the splitter on my aftermarket Turbo nose, but it looks like all of the splitters I see out there are more curved than the aftermarket nose (the aftermarket one is slightly flatter...).
Anyone out there tried this? Could it be trimmed to fit?
Tifosiman
Anyone out there tried this? Could it be trimmed to fit?
Tifosiman
