Removing Pins from DME Harness
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I am swapping out my Spd and Ref Sensors and Harness. I have everything routed and am at the point where I need to pull some of the Pins from the DME Harness. I am trying to get them out, am using an eyeglass repair kit screwdriver to depress the tangs. Do I just need to pry "up" (away from the small slot where toll insertion is easiest) or do I need to pry them "together" using two of the small screwdrivers? Any advice from anyone who has done this would be greatly appreciated. Thanks in advance. Cheers, -Reid
#2
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Figured it out, on with the job...
#3
Proprietoristicly Refined
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
THE tool
http://www.eagleday.com/ampconnectors.html
Experience:
https://rennlist.com/forums/944-turb...lved-pics.html
or
http://www.texasblake.com/porsche/tech/harness.html
GL
John
maybe
http://www.eagleday.com/ampconnectors.html
Experience:
https://rennlist.com/forums/944-turb...lved-pics.html
or
http://www.texasblake.com/porsche/tech/harness.html
GL
John
maybe
#4
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks John, that texasblake site is cool, never had seen it before.
#5
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ended up using an small awl type tool from a cheap auto zone kit of dentist looking tools I bought to fish seals out of my MX brake caliper when I was doing a rebuild. Worked great.