metal vaccum tee fittings ?
03-06-2002, 03:27 PM
#1
Racer
Thread Starter
Join Date: Jun 2001
Location: Ga
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
metal vaccum tee fittings ?
guys, where can get metal tee fittings for the vac system ? ive been surfing the web with no results. i'm doing a silicone line replacement and want the meatal ones instead of the flimsy plastic crap.
preferably stainless but any metal will do thanks keith
preferably stainless but any metal will do thanks keith
03-07-2002, 01:57 AM
#4
Racer
Join Date: Jun 2001
Location: houston
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
a few months ago I found a place on line:
<a href="http://www.parker.com" target="_blank">www.parker.com</a>
go to the "fluid connectors" section, then "brass fittings", then distributor list to find someone to order them from. they will do small volume (2 or 3) in my experience.
I ordered some from the local parker distributor, but it took a while to come in. in the interim I found a local hardware store that sold them.
<a href="http://www.parker.com" target="_blank">www.parker.com</a>
go to the "fluid connectors" section, then "brass fittings", then distributor list to find someone to order them from. they will do small volume (2 or 3) in my experience.
I ordered some from the local parker distributor, but it took a while to come in. in the interim I found a local hardware store that sold them.
