CPR 951 Splitters
#1
CPR 951 Splitters
Does anyone know if Patrick is in town? I ordered a splitter and sent him an e-mail about a week & a 1/2 ago and have not heard from him. I know he is often out of the country, so I don't want to be impatient if he is not in the US.
Thanks
Thanks
#5
Nordschleife Master
#6
Race Director
I doubled checked and your email went to my junk box, so my apologies for not getting back to you sooner. I do not check the filtered mail at all.
Either way, To all I am getting out of the 944/951 business. It has become increasingly difficult to maintain the orders while actually doing my real job that pays for developing most of these items.
This was just a hobby, I guess my way of trying to contribute something back to the 944/951 community that I was very fond of. However, the crowd isn't the same of old and in this world of now,now,now....I simply cannot keep dedicating all of my free time to this little profitless side endeavor and not to my family.
I would like to say thanks to everyone that has been very supportive of what I did for a bit and hope that all have found some use in these products. I know that the vendor market for these cars shrinks by the month, so make sure you take care of all the other vendors out there!
Thanks again to everyone that was there in the beginning,
Patrick
***AND PLEASE, FOR GODS SAKE, LEAVE THIS BUSINESS OFF OF RENNS. THEY ARE NOT YOUR "BETTER BUSINESS BUREAU", OR COMPLAINT HOTLINE. I AM NOT A VENDOR HERE SO THEY SHOULD NOT HAVE TO DEAL WITH IT******
Patrick
Trending Topics
#8
Race Director
Either way, To all I am getting out of the 944/951 business. It has become increasingly difficult to maintain the orders while actually doing my real job that pays for developing most of these items.
This was just a hobby, I guess my way of trying to contribute something back to the 944/951 community that I was very fond of. However, the crowd isn't the same of old and in this world of now,now,now....I simply cannot keep dedicating all of my free time to this little profitless side endeavor and not to my family.
I would like to say thanks to everyone that has been very supportive of what I did for a bit and hope that all have found some use in these products. I know that the vendor market for these cars shrinks by the month, so make sure you take care of all the other vendors out there!
Thanks again to everyone that was there in the beginning,
Patrick
***AND PLEASE, FOR GODS SAKE, LEAVE THIS BUSINESS OFF OF RENNS. THEY ARE NOT YOUR "BETTER BUSINESS BUREAU", OR COMPLAINT HOTLINE. I AM NOT A VENDOR HERE SO THEY SHOULD NOT HAVE TO DEAL WITH IT******
Patrick
Hey Patrick,
Just wanted to say thanks for putting out some nice products. I really like the effort you put into the 951 splitter design. Hopefully someday I'll be able to install mine ----- I'm certain it will fit like a glove.
I can't blame you for your decision. I completely understand and sympathize.
Best of luck mate.
Jeremy
#9
Burning Brakes
Either way, To all I am getting out of the 944/951 business. It has become increasingly difficult to maintain the orders while actually doing my real job that pays for developing most of these items.
This was just a hobby, I guess my way of trying to contribute something back to the 944/951 community that I was very fond of. However, the crowd isn't the same of old and in this world of now,now,now....I simply cannot keep dedicating all of my free time to this little profitless side endeavor and not to my family.
I would like to say thanks to everyone that has been very supportive of what I did for a bit and hope that all have found some use in these products. I know that the vendor market for these cars shrinks by the month, so make sure you take care of all the other vendors out there!
Thanks again to everyone that was there in the beginning,
Patrick
***AND PLEASE, FOR GODS SAKE, LEAVE THIS BUSINESS OFF OF RENNS. THEY ARE NOT YOUR "BETTER BUSINESS BUREAU", OR COMPLAINT HOTLINE. I AM NOT A VENDOR HERE SO THEY SHOULD NOT HAVE TO DEAL WITH IT******
Patrick
i also want to thank you for your contribution and time to the 944 community. its not easy or cheap to do what you did for this place, and we will all miss you . things just arent the same both here and out there. take care patrick and hope to see you again someday.
-KEm
#10
Race Car
I have been on this forum for only 2 years and I already know many things that you have done for us 944 owners. If I needed a splitter or some turn signals, I would have gone to you first. Thank You for the time you did spend! It was greatly appreciated by everyone!
#12
Rennlist Member
Yes, thanks a bunch for your efforts especially with your travails.
Best of luck reacquainting yourself with the family.
Best of luck reacquainting yourself with the family.
#14
Patrick,
As the OP I was not trying to use Rennlist as a compaint department. I was just trying to use the route that I new to get ahold of you. Thanks for getting back to me. I am very sorry to hear you are not selling your products anymore. I have read all the posts from people that were very pleased. I am disapointed I did not get one earlier when they were available.
Best of luck in all your endeavors and please keep me in mind if you find yourself able to sell the splitters again.
Thanks
Rick
As the OP I was not trying to use Rennlist as a compaint department. I was just trying to use the route that I new to get ahold of you. Thanks for getting back to me. I am very sorry to hear you are not selling your products anymore. I have read all the posts from people that were very pleased. I am disapointed I did not get one earlier when they were available.
Best of luck in all your endeavors and please keep me in mind if you find yourself able to sell the splitters again.
Thanks
Rick
#15
Race Director
Patrick,
As the OP I was not trying to use Rennlist as a compaint department. I was just trying to use the route that I new to get ahold of you. Thanks for getting back to me. I am very sorry to hear you are not selling your products anymore. I have read all the posts from people that were very pleased. I am disapointed I did not get one earlier when they were available.
Best of luck in all your endeavors and please keep me in mind if you find yourself able to sell the splitters again.
Thanks
Rick
As the OP I was not trying to use Rennlist as a compaint department. I was just trying to use the route that I new to get ahold of you. Thanks for getting back to me. I am very sorry to hear you are not selling your products anymore. I have read all the posts from people that were very pleased. I am disapointed I did not get one earlier when they were available.
Best of luck in all your endeavors and please keep me in mind if you find yourself able to sell the splitters again.
Thanks
Rick
Sorry mate, it was not directed at you per se. The short of it was that I began this little adventure as my way of contributing back to this and other Porsche communities that support our models. I was never in it for the money, but more as kind of saying here...let's keep this model alive and well, and continue to breathe life into it through some new inexpensive products that are within everyones budget. Similiar approach I think D9 takes. It is not easy to design/fab/produce/finance/ship etc... these items when you are doing it as a side venture to keep costs low and hopefully, people happy. To do it as a full time job would simply equate to higher prices/overhead....and this model market simply does not support that, unless you are full bore engine side as well.
I thoroughly enjoyed doing it, and have met a tonne of great folks along the way, so no regrets except that I now have to stop.
But thanks again to all, and you know.....maybe one day
In the meantime continue to support all the other great vendors for the 944/951 market....Vitesse, CEP, SFR, Chris White/944 enhancements, D9, racers edge, welt, Koni...etc.....
And wish everyone well with their ongoing projects