Were factory 924S engine blocks sleeved from factory?
#1
Rennlist Member
Thread Starter
![Question](https://rennlist.com/forums/images/icons/icon5.gif)
A guy on another forum has cracked his 924S engine open only to find the cylinders sleeved and scored.
Please correct me if I'm mistaken, but I thought these engines came from the factory with Aluminum Silicon blocks bored and Nikasil treated with no sleeves?
TIA
![](https://img198.imageshack.us/img198/6971/dscn9914.jpg)
Please correct me if I'm mistaken, but I thought these engines came from the factory with Aluminum Silicon blocks bored and Nikasil treated with no sleeves?
TIA
![](https://img198.imageshack.us/img198/6971/dscn9914.jpg)
![](https://img36.imageshack.us/img36/5397/dscn9918m.jpg)
#4
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
correct. No sleeves. At least not when new.
If you are looking at the lines on the top of the block that is dirt. Outside is dirty from the head gasket and the inside is cleaner from the metal fire ring.
If you are looking at the lines on the top of the block that is dirt. Outside is dirty from the head gasket and the inside is cleaner from the metal fire ring.
Trending Topics
#13
Three Wheelin'