Lexan Rear Hatch Opinion???
#1
Racer
Thread Starter
Join Date: May 2003
Location: Harvest, AL
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What is the opinion on a Lexan Rear Hatch?
The one from DEUTSCH NINE looks pretty good. it's non-yellowing, which is what I understand is the biggest issue with lexan.
The one from DEUTSCH NINE looks pretty good. it's non-yellowing, which is what I understand is the biggest issue with lexan.
#4
Advanced
Join Date: Sep 2009
Location: austin and tallahassee via pheonix!
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i used one on a 90 fc rx-7 i had. it was awesome and was sooooo much lighter. but i dont know if yur doing this for track or what. if thats the case its a no brainer.
#5
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Percy's speedglass makes a rear hatch that has a coating on it that will not scratch or haze (well all their glass has the coating). I have taken steel wool to one without a scratch.
#7
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Apex Performance has them for sale for $3-400.
I had one installed in my race car and it shaved off about 20#.
They also sell a plexiglass cleaner/wax that's used in the aerospace industry and it's working out good so far.
I had one installed in my race car and it shaved off about 20#.
They also sell a plexiglass cleaner/wax that's used in the aerospace industry and it's working out good so far.
Trending Topics
#8
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well i use to get them through a dealer (arrowspeed warehouse) because a buddy worked there and it was just as easy to go that route. Then arrow went out of business, and I was able to persuade percy's to sell a few direct, which they really fought me on.....i just kept calling, lol, finally they gave in. Summit racing also sells them IIRC. We have used their windshields mostly, and they have been great. I can't remember what they run, but IIRC they are a little more expensive than your basic lexan.
#9
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would not bother for a street car. Too much hassle.
For a track car it can be a help, but it still creates some hassle. 20lbs makes a difference on the track, but there are much easier ways to get 20lbs out for most. Once you have done all the easy stuff then these hatches start looking alot better.
For a track car it can be a help, but it still creates some hassle. 20lbs makes a difference on the track, but there are much easier ways to get 20lbs out for most. Once you have done all the easy stuff then these hatches start looking alot better.
#10
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I ran a "Speedglass" windshield on a Jeep TJ for about 6-7 years. It was awesome. Loved it on the street even more than on the trail. SUPER slick coating makes water just sheet right off. No scratches, chips to deal with.
One year we drove 8 hours in a snow storm after wheeling. Jeep was covered in mud and muck and the wipers never left a mark on the coated lexan.
Even for a street car I think all the light weight stuff you can do it beneficial. The less weight the car has the more fun it is to drive, the less strain there is on the drive train and the better fuel economy will eventually off set costs.
Not to mention that this shaves weight from a high point on the car which will add to handling. I would imagine that this, a hood and sunroof would even be noticeable on the street.
One year we drove 8 hours in a snow storm after wheeling. Jeep was covered in mud and muck and the wipers never left a mark on the coated lexan.
Even for a street car I think all the light weight stuff you can do it beneficial. The less weight the car has the more fun it is to drive, the less strain there is on the drive train and the better fuel economy will eventually off set costs.
Not to mention that this shaves weight from a high point on the car which will add to handling. I would imagine that this, a hood and sunroof would even be noticeable on the street.
#11
Drifting
Join Date: Jan 2008
Location: Suburban DC
Posts: 2,641
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would not bother for a street car. Too much hassle.
For a track car it can be a help, but it still creates some hassle. 20lbs makes a difference on the track, but there are much easier ways to get 20lbs out for most. Once you have done all the easy stuff then these hatches start looking alot better.
For a track car it can be a help, but it still creates some hassle. 20lbs makes a difference on the track, but there are much easier ways to get 20lbs out for most. Once you have done all the easy stuff then these hatches start looking alot better.
If I did it, I would pick up a salvage rear frame and just swap the hatch.
#12
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
haze and scratches. Plus the need to be carefull when cleanning. Glass is pretty easy to clean. Remember I also live in dust land. So I can easly get a layer of sand on the car from the wind. Wipe that clean the wrong way it will scratch.
#13
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What haze and scratches?
I took this picture just before selling my TJ. It was on 37" tires, wheeled hard and often. The coated lexan windshield was in the Jeep 6-7 years. Jeep saw more dirt and dust than these Porsches ever will.
This is what it looked like for the sale. (165k on the Jeep)
![](http://farm4.static.flickr.com/3454/3219355826_7271866691_o.jpg)
Just an old photo to give you an idea how hard the Jeep was wheeled.
![](http://farm4.static.flickr.com/3498/3218505087_b0d6e982ed.jpg)
#15