You clean a little, paint a little and then you break a little - photos
#1
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Angry](https://rennlist.com/forums/images/icons/icon8.gif)
Still waiting on a few parts; camshaft housing bolts, head nuts, and rod nuts)
And waiting until Monday to order the valve stem seals, water pump, a few other things from Paragon... I hope they have some heat wrap for the exhaust manifolds.
While we wait for that, we painted a few items, cleaned the pistons, and got the head cleaned, valves done, etc.
And also broke the cam cap...
One of the bolts was stripped (the one that holds a ground cable). I tapped the hole for a 7mm bolt and had to open the cap hole accordingly. Well… the bit got stuck and the whole housing turned… sure enough… the cap now has a crack and will need to be replace… just when that happens and I start cursing… wife comes in the garage and tells me not to spend anymore on the #$%#% car…
Also, here are a few photos of the repaired exhaust manifolds. I hope that holds for a while.
(Nice way of finding out that the intial post cannot hold more that 8 photos!!!) Here we go again:
Painted intake manifold (yes, high temp paint):
And waiting until Monday to order the valve stem seals, water pump, a few other things from Paragon... I hope they have some heat wrap for the exhaust manifolds.
While we wait for that, we painted a few items, cleaned the pistons, and got the head cleaned, valves done, etc.
And also broke the cam cap...
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
Also, here are a few photos of the repaired exhaust manifolds. I hope that holds for a while.
(Nice way of finding out that the intial post cannot hold more that 8 photos!!!) Here we go again:
Painted intake manifold (yes, high temp paint):
#2
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Angry](https://rennlist.com/forums/images/icons/icon8.gif)
I guess I will be buying another cap. Here is the old one... not sure if you will be able to notice the crack...
![](https://groups.msn.com/_Secure/0MAB0cKkP1WCGAnigHgppWQ0JSFO5A6HGFqWXTZBDEtbP!3UOgoA4dOqmg1CeL77pjWfFUoGNBm9zLmdpZgBmAA/DCP_0969.JPG)
Repaired cross pipe. Flange welded in place:
Repaired cross pipe. Flange welded in place:
#3
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Cool](https://rennlist.com/forums/images/icons/icon6.gif)
Repaired exhaust manifold 1-4:
![](https://groups.msn.com/_Secure/0MAA4GaUPOWCGAnigHgppWTMS9jtoYP64KinLcmMHnDUOlQz7QMWsDR!ANsJBjmOd2mQM9dBGVBx0AHAAOgAvAA/DCP_0965.JPG)
and 2-3 (where 2 meets the "Y" ):
![](https://groups.msn.com/_Secure/0MABZEKQPEmCGAnigHgppWYpxwg*ONXMqywZ!Vs0YWCV8ySup!F62LqPEo304HlEL*kAYU1*agcB0AHAAOgAvAA/DCP_0964.JPG)
Painted the camshaft housing and polished the PORSCHE letters and the lines:
and 2-3 (where 2 meets the "Y" ):
Painted the camshaft housing and polished the PORSCHE letters and the lines:
#5
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Cool](https://rennlist.com/forums/images/icons/icon6.gif)
And last Sunday there was a Shine, Wine and, Dine event from the local PCS club... here is one photo. My father-in-law and brother-in-law took the 964 while I rode the bike.
![](https://groups.msn.com/_Secure/0MAAAAKkP1WBVoURS53S2TWAxQGO8rzSDhgmZ9vPJQ9a7hnH69t28fmf5MPaJz2KYqX8H2RQBb4V0AHAAOgAvAA/DCP_0888.JPG)
Enjoy the photos!
Enjoy the photos!
#7
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
[quote]Originally posted by Andre:
<strong>the intake looks GREAT!what kinda paint did you use?and whered you get it?</strong><hr></blockquote>
AutoZone - high temp aluminum and high temp clear...
<strong>the intake looks GREAT!what kinda paint did you use?and whered you get it?</strong><hr></blockquote>
AutoZone - high temp aluminum and high temp clear...
Trending Topics
#8
Done With Sidepatch
Rennlist Member
Rennlist Member
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
Looks great Jamie...I don't think you'll have a problem finding one of those caps locally (Ian in Pompano Beach is real close to you) but if you do I have an extra I can send you no charge...
#9
Professor of Pending Projects
Rennlist Member
Rennlist Member
Thread Starter
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
[quote]Originally posted by Mike B:
<strong>Looks great Jamie...I don't think you'll have a problem finding one of those caps locally (Ian in Pompano Beach is real close to you) but if you do I have an extra I can send you no charge...</strong><hr></blockquote>
Thanks for the offer Mike. Let me try getting one locally. Thanks again!!
<strong>Looks great Jamie...I don't think you'll have a problem finding one of those caps locally (Ian in Pompano Beach is real close to you) but if you do I have an extra I can send you no charge...</strong><hr></blockquote>
Thanks for the offer Mike. Let me try getting one locally. Thanks again!!
#10
Addict
Rennlist
Lifetime Member
Rennlist
Lifetime Member
Join Date: Dec 2001
Location: Chelmsford Ma
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
The cam looks AWESOME!!! I am about to do mine. I may go with silver instead of read. I would like to know what you used to polish the PORSCHE and the lines???