Just finished wiring my keylight
#1
Set to Full-Auto
Rennlist Member
Rennlist Member
Thread Starter
![Cool](https://rennlist.com/forums/images/icons/icon6.gif)
I found a drawing on the list a few days ago of how to put a white LED in the factory keyhead. When I bought the car, the light bulb was missing and the battery looked original. I went down to my local friendly Radio Shack and bought a LED and some batteries and proceeded to build it. It works GREAT! Anyone with minimal electrical skills can do this, a small, inexpensive, but useful upgrade-in my case, a repair. Anyway, just though I'd share this.
#3
Set to Full-Auto
Rennlist Member
Rennlist Member
Thread Starter
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
I have the packages back at the house, I will dig them out and post them later tonight when I get back home. Are you thinking of doing this? It really wasn't too hard, and only cost $12.00
#4
Three Wheelin'
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
I am! I went to radio shack a couple of days back but couldn't find a battery that matched, at least with a part # I can ask one of the clerks to find it for me
TIA!
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
TIA!
#5
Done With Sidepatch
Rennlist Member
Rennlist Member
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
Here is another very detailed write up on how to do it by rob944s2 from 968.net
<a href="http://63.136.85.109/forum/topic.asp?TOPIC_ID=3291" target="_blank">rob944s2's Porsche Key upgrade</a>
<a href="http://63.136.85.109/forum/topic.asp?TOPIC_ID=3291" target="_blank">rob944s2's Porsche Key upgrade</a>
#6
Rennlist Member
Join Date: May 2001
Location: North Of Chicago
Posts: 1,992
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
Used the procedure on 968.net and did this same thing. I used a super bright blue LED, but these (and the whites) require more voltage. I think they need a minium of 3V to light. I also got my batteries @ Radio Shack. They are model CR1220, 11.6mm dia x 2.0mm thick. These are 3V per battery (I used 2, could easily fit 3 in there, factory battery is a little over 6mm thick)and it works great.
Here is a pic:
<img src="http://boards.rennlist.com/upload/Keylight001sm.jpg" alt=" - " />
HTH,
Here is a pic:
<img src="http://boards.rennlist.com/upload/Keylight001sm.jpg" alt=" - " />
HTH,
Trending Topics
#10
Set to Full-Auto
Rennlist Member
Rennlist Member
Thread Starter
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
Does anyone know where I can get a replacement Porsche crest sticker for my key head? Mine was gone when I got the car and now that I have a decent light, I also would like to have a complete head.