Parting out 86 944na
#16
Passenger trim strip, the aluminium piece above the door, its for a friend. He may also bneed the front bumper and some for the assorted hardware underneath the bumper, he just got hit by a Nissan in the front quarter. e-mail xcessiv@teleport.com
#17
Dave,
Does the car have the headlight washers? If so, I need the reservoir cap w/ the fittings(one "T" and one "L") attached. Also, if not overly brittle, the length of windshield washer hose that goes from the reservoir to the "T" fitting at the passenger spray nozzle. Guess what I broke this weekend Let me know, thanks.
Does the car have the headlight washers? If so, I need the reservoir cap w/ the fittings(one "T" and one "L") attached. Also, if not overly brittle, the length of windshield washer hose that goes from the reservoir to the "T" fitting at the passenger spray nozzle. Guess what I broke this weekend Let me know, thanks.
#18
Are the console switches (sunroof, window adjustment, rear wiper, etc.) in good condition?
My switches work fine, but they are faded - the original white markings have worn. I would be interested in switches that look like new.
My switches work fine, but they are faded - the original white markings have worn. I would be interested in switches that look like new.
#19
is this thing still getting parted out? seems like you havent been responding. i still need the front header panel with the porsche emblem on it. and i just broke my drivers side door handle five minutes ago, so i need that also. dereknu@hotmail.com
#20
how many miles on the tranny? I think it might be too expensive to replace the ring and pinion in my old na tranny...
<img border="0" alt="[burnout]" title="" src="graemlins/burnout.gif" />
<img border="0" alt="[burnout]" title="" src="graemlins/burnout.gif" />
#25
I'm still here guys and am checking on the stuff yall want. Most of it is in good shape, console switches are faded, cruise was already spoken for. Tranny has about 110k miles but was known to be good before the belt broke. Both fenders and the front header panel are in ok shape, meaning they will need paint. Car is black. Door weather stripping is ok, rear hatch seal is partially eroded, but the rest is in good shape. Starter is known good. Washer resevoir doesn't leak, piping is ok too.
I'll get back with yall on Wednesday, had to go see a customer (my real job) on Tuesday in Chattanooga, had other stops on the way so I had to leave the plant in the wee hours of Monday morning. So... Porsche stuff comes to a halt till then. I will get back to all of you then.
I'll get back with yall on Wednesday, had to go see a customer (my real job) on Tuesday in Chattanooga, had other stops on the way so I had to leave the plant in the wee hours of Monday morning. So... Porsche stuff comes to a halt till then. I will get back to all of you then.
#28
Looking for the following parking brake parts
I need a new SPRING (#10) OPERATING LEVER (#16) and THRUST BAR (#13) as shown in the diagram from the infamous Haynes Manual page 153 dia 5.1b
I am also looking for 2 BLACK interior rubber trim plugs for the "A" Pillar screw holes.
Let me know the cost and availability for these items! Thanks.
<a href="http://boards.rennlist.com/upload/parkingbrake2.jpg" target="_blank">Parking brake parts</a>
<img src="http://boards.rennlist.com/upload/parkingbrake2.jpg" alt=" - " />
I need a new SPRING (#10) OPERATING LEVER (#16) and THRUST BAR (#13) as shown in the diagram from the infamous Haynes Manual page 153 dia 5.1b
I am also looking for 2 BLACK interior rubber trim plugs for the "A" Pillar screw holes.
Let me know the cost and availability for these items! Thanks.
<a href="http://boards.rennlist.com/upload/parkingbrake2.jpg" target="_blank">Parking brake parts</a>
<img src="http://boards.rennlist.com/upload/parkingbrake2.jpg" alt=" - " />
#29
Does the car have power locks? If so I am looking for the little plastic peices that connect between the door locking solenoid and the door lock. here is a pic:
<img src="http://boards.rennlist.com/upload/1door.gif" alt=" - " />
<img src="http://boards.rennlist.com/upload/1door.gif" alt=" - " />
#30
Dave,
Sounds good. Although for clarification, I just need the reservoir cap(if the car has headlight washers), the 2 fittings that are part of the cap (T and L), and the fluid hose that goes from the reservoir cap to the passenger spray valve.
Sounds good. Although for clarification, I just need the reservoir cap(if the car has headlight washers), the 2 fittings that are part of the cap (T and L), and the fluid hose that goes from the reservoir cap to the passenger spray valve.