944 V8 swap (with pics)
#77
I really wouldnt worry about the wiring, it was very simple especially if you follow the Porsche Hybrids Wiki, it may seem confusingbat first, and I was nervous too, but once you have everything in front of you, it really is simple.
#80
Three Wheelin'
Thread Starter
by the way, for headers i'm going to try these, i have no idea if they will work or not, but i could probably just spin them around and have them dump forward if they don't fit going back...
http://store.summitracing.com/partde...part=HED-69520
http://store.summitracing.com/partde...part=HED-69520
#81
by the way, for headers i'm going to try these, i have no idea if they will work or not, but i could probably just spin them around and have them dump forward if they don't fit going back...
http://store.summitracing.com/partde...part=HED-69520
http://store.summitracing.com/partde...part=HED-69520
When I get my car back from the exhaust shop, ill take pics of how my headers fit so you can get a better idea how the steering shaft fits between the header tubes.
#83
I found a picture of the header off the car so you can get an idea of what it needs to look like. I know your installing an LT1 but it still needs the same style opening between the last two header tubes. You can see how wide the opening is there and that is even a tight fit in there. Hope this helps a little. I get other pics hopefully tomorrow if my car gets done.
#84
Three Wheelin'
Thread Starter
hmm, okay, good to know, i'm thinking i'll probably have to run these headers backwards, but i might give modifying them a try to see if a little cutting and welding will get them to work
thanks!
Ethan
thanks!
Ethan
#90
Three Wheelin'
Thread Starter
thanks!