Rennbay: Racing Timing Belts now available & 1 Day Sale
03-17-2009, 12:14 PM
#16
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: Aug 2002
Location: A great big building in the woods, FL.
Posts: 6,527
Likes: 0
Received 4 Likes
on
3 Posts
I have not been able to find one instance of a belt failure on any of the other models that have been produced by Gates Racing division. Gates will only guaranty them to the factory change intervals though.
They are a far superior belt to the ones we have now and they could probably be run well into the 60k range but they are not warrantied past the factory change time / mileage.
They are a far superior belt to the ones we have now and they could probably be run well into the 60k range but they are not warrantied past the factory change time / mileage.
so whos gonna be the guinea pig?
03-17-2009, 01:30 PM
#18
Rennlist Member
There are a number of people with balance shaft delete kits...
03-17-2009, 01:58 PM
#20
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: Aug 2002
Location: A great big building in the woods, FL.
Posts: 6,527
Likes: 0
Received 4 Likes
on
3 Posts
lol... Forgot about that. Good call. If anyone needs just the Tbelt shoot me over an email or give me a call.
Sale is good until I get into the office tomorrow morning to take it down, so you have all night.
Sale is good until I get into the office tomorrow morning to take it down, so you have all night.
03-17-2009, 02:15 PM
#22
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: Aug 2002
Location: A great big building in the woods, FL.
Posts: 6,527
Likes: 0
Received 4 Likes
on
3 Posts
Rennbay now offers a LayAway service. 
Just get in touch with me when you do get where you need to be to order and I will get you setup with the discount.
Just get in touch with me when you do get where you need to be to order and I will get you setup with the discount.
03-17-2009, 04:12 PM
#26
Drifting
Join Date: May 2008
Location: Virginia Beach, VA
Posts: 2,080
Likes: 0
Received 15 Likes
on
11 Posts
If nobody else wants to jump on this, then I guess I'll be the Guinea pig.
03-17-2009, 04:15 PM
#27
Burning Brakes
03-17-2009, 04:16 PM
#28
Lazer Beam Shooter
Rennlist Member
Rennlist Member
Guys these belts are the real deal. For liability reasons, vendors/manufacturers cant say that they will outlast factory specs.
Im gonna go on the record here, and I am in no way affiliated with Gates, or Rennbay so take what I say here with a grain of salt.
These belts DO NOT stretch.
These belts DO NOT break.
and these belts will not breakdown from contact with oil, like most 944 timing belts do.
Gates has put out some really really high quality belts that ive seen for other cars. They really are one of the best belts that money can buy. Its a good thing we finally have some updated, newer technology like this for the 944. As crazy as we are about doing the timing belts on these cars, we should be thankful that there is something like this offered for our cars now.
Im gonna go on the record here, and I am in no way affiliated with Gates, or Rennbay so take what I say here with a grain of salt.
These belts DO NOT stretch.
These belts DO NOT break.
and these belts will not breakdown from contact with oil, like most 944 timing belts do.
Gates has put out some really really high quality belts that ive seen for other cars. They really are one of the best belts that money can buy. Its a good thing we finally have some updated, newer technology like this for the 944. As crazy as we are about doing the timing belts on these cars, we should be thankful that there is something like this offered for our cars now.
03-17-2009, 04:19 PM
#29
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: Aug 2002
Location: A great big building in the woods, FL.
Posts: 6,527
Likes: 0
Received 4 Likes
on
3 Posts
Is this the same Gates belt? http://cgi.ebay.co.uk/GATES-TIMING-B...3A1|240%3A1318