JoakimJ

Hello!
I´m looking for some pics of boost Gauge installations.

What gaugemanufactur can you guys recomend?

sybelix

well, there are a few, VDO, autometer, revotec..

depends if you want it to show PSI or BAR..
the installation is a peace a cake anyway

I have a Revotec. <a href="http://www.revotec.co.uk/" target="_blank">http://www.revotec.co.uk/</a>

looks great on a black panel.

sybelix

<img src="http://boards.rennlist.com/upload/gbbar.gif" alt=" - " />
this to be exact
<img border="0" title="" alt="[Wink]" src="wink.gif" />

adrial

I have an autometer and I used to have some gauge that I bought from Lotek (gaugepods.com), both suck IMO.

The one from gaugepods.com eventually started reading way off..(wasn't reading 0 with the car off).

The autometer reads 0, kind of. The 0 range is rather large, and my gauge used to read dead center. Now it reads towards the bottom of it, if not below the 0 range...This doesn't quite instill confidence when dialing in the boost.

sybelix

my gauge has been there for like 4 months or so.
It goes to 0 (12 o'clock) when I shut the engine down, at seems to be very reliable.