climate control units
#1
Rennlist Member
Thread Starter
Join Date: Mar 2005
Location: Norfolk,Va.
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
climate control units
I am interested in purchasing faulty units that are complete with good cases.
I want to attempt repairing them. They must be cheap! TIA
I want to attempt repairing them. They must be cheap! TIA
#6
Nordschleife Master
Rip it, if you can find some way of providing/manufacturing the clear plastic faceplate you would be a genius. I have three of these cars and all my faceplates are damaged in some way, and offcourse they are NLA. Sure other peoples are the same.
#7
Rennlist Member
Thread Starter
Join Date: Mar 2005
Location: Norfolk,Va.
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the responses. Glad u asked $25+shipping to zip 23518.
OR if u send me two, no charge, I will repair and send u a tested working unit back. Units must have unbroken cases and plastics.
That's going to be my biggest problem, getting to the electronics without breaking the plastics. I will probably have to find a source to make face plates. These things are a PITA, expensive, and I just want to give it a shot at repairing them, if successful I will pass the info out.
OR if u send me two, no charge, I will repair and send u a tested working unit back. Units must have unbroken cases and plastics.
That's going to be my biggest problem, getting to the electronics without breaking the plastics. I will probably have to find a source to make face plates. These things are a PITA, expensive, and I just want to give it a shot at repairing them, if successful I will pass the info out.