I got the front instructions from the site theedge set up. Thanks.

Anyone have the rear? I spoke to performance today and the guy was very helpful and pulled them, told me he would email them to me and that was 5 hours ago.

I need to lay out all my parts and see what if anything is missing before i start pulling things off the car. That's why i am asking.

Thanks.

 

The files on my site have instructions for the rear bar. Look at sway5.jpg and sway6.jpg.

http://thedge.info/index.php?d=rennl...eltmeisterbars

 

The fronts are a pain to put on but the backs are straight forward. Take off the old bar and bolt up the new one using the drop link included in the kit. My car is on the lift so I can snap a picture if that would help. My instructions are somewere but not were I first loooked.

 

I don't recall any tricks to installing my rear ones, beyond zip-tieing the parking brake cables (I think) to the bar. Otherwise, no real tricks. But then, I may have cussed a bit during the install.

I guess this post is pretty useless.

BB.

 

it isnt tricks, it is making sure i have all the parts before i start.

 

Two drop links and the bar. Two hose clamps on the inside of each mount will keep the bar centered.

 

I believe the previous BB has them covered, save for the zip ties, hardware and larger bushings. The hardware should be pretty self-explanatory once you look at it all.

BB.

 

Here's a picture. This may help. It doesn't show the hose clamp or the one nut and washer (re-use from old bar) and the two rod end liners that goes on the other end of the drop link.