QA1 Springs opinions
03-18-2008, 11:29 AM
#2
Addict
Rennlist Member
Rennlist Member
IMHO get a proper brand name, like Hypercoil.
I have a set of QA1 rear coilovers.... One shock is dead and the springs are rusty and the paint peeling off badly after 3 or 4k miles. Crap.
I have a set of QA1 rear coilovers.... One shock is dead and the springs are rusty and the paint peeling off badly after 3 or 4k miles. Crap.
03-18-2008, 12:44 PM
#4
Three Wheelin'
Join Date: Jul 2001
Location: San Francisco, CA Porsche: '92 968 Blk/Cashmere
Posts: 1,699
Likes: 0
Received 0 Likes
on
0 Posts
Running the springs on koni shocks. They work fine and just as good as the hypercoils I had on prior. No issues with paint, but I live in a mild climate where snow and salt are not an issue.
03-18-2008, 01:56 PM
#5
Instructor
Join Date: Aug 2005
Location: Columbus, Ohio
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Not sure about QA1 springs, but I'm runing Hypercoils with QA1 rear coilovers like Mike and Hypercoils with Koni yellows in the front and they've worked out well. I would strongly recommend Hypercoils but I can't compare them personally to the QA1's.
03-18-2008, 02:15 PM
#6
Drifting
Thread Starter
Where I am going with this question is that I can get a good deal on a set of QA1 for my front strut conversion. I was planning on going with the HYpercoils but be the cheap bastard that I am, I decided why not go with the QA1's?
I mean spring rate is spring rate right???
I mean spring rate is spring rate right???
03-18-2008, 03:30 PM
#7
Three Wheelin'
Join Date: Jul 2001
Location: San Francisco, CA Porsche: '92 968 Blk/Cashmere
Posts: 1,699
Likes: 0
Received 0 Likes
on
0 Posts
Where I am going with this question is that I can get a good deal on a set of QA1 for my front strut conversion. I was planning on going with the HYpercoils but be the cheap bastard that I am, I decided why not go with the QA1's?
I mean spring rate is spring rate right???
I mean spring rate is spring rate right???
