Leather dash attempt..
#3
I'm prayin' to the P-car gods for you :-) Especially as my dash is cracked and would look nice in leather... Want to see how you go first!
I emailed the fella at the 928 leather shop about their dash covers - apparently it requires a lot of carefull fitting, and a "custom bracket" below the dash to hold the back edge of the cover, plus they insert a trim piece into the vent on top to cover the edges of the leather too...
I'd you'll need to do a lot of careful measurements - and get really inventive around the vents and the glove box...
Good luck man!
I emailed the fella at the 928 leather shop about their dash covers - apparently it requires a lot of carefull fitting, and a "custom bracket" below the dash to hold the back edge of the cover, plus they insert a trim piece into the vent on top to cover the edges of the leather too...
I'd you'll need to do a lot of careful measurements - and get really inventive around the vents and the glove box...
Good luck man!
#4
#5
I'm prayin' to the P-car gods for you :-) Especially as my dash is cracked and would look nice in leather... Want to see how you go first!
I emailed the fella at the 928 leather shop about their dash covers - apparently it requires a lot of carefull fitting, and a "custom bracket" below the dash to hold the back edge of the cover, plus they insert a trim piece into the vent on top to cover the edges of the leather too...
I'd you'll need to do a lot of careful measurements - and get really inventive around the vents and the glove box...
Good luck man!
I emailed the fella at the 928 leather shop about their dash covers - apparently it requires a lot of carefull fitting, and a "custom bracket" below the dash to hold the back edge of the cover, plus they insert a trim piece into the vent on top to cover the edges of the leather too...
I'd you'll need to do a lot of careful measurements - and get really inventive around the vents and the glove box...
Good luck man!
Thanks. Arg, now i'm really scared if I mess up, haha.
#7
Trending Topics
#10
Almost Addicted
Rennlist Member
Rennlist Member
Joined: Feb 2007
Posts: 9,181
Likes: 11
From: behind enemy lines <REDACTED>
The old saying is measure twice, cut once- measure 10x, make sure your measurements are correct, make sure what you think the measurements should be is actually correct, measure a few more times.... then cut. And don't forget the supreme rule: post pics.
#11
Well, i've tooken off all the old vinyl, but should I start recovering now? The leather dosn't show the cracks, it just covers them up. BUt if I did that would the dash be uneven?
#14
Almost Addicted
Rennlist Member
Rennlist Member
Joined: Feb 2007
Posts: 9,181
Likes: 11
From: behind enemy lines <REDACTED>