gizmozoid

Seasons greetings y'all.

Got some stuff for sale, makes great stocking stuffers (if you have really BIG stockings).

'86 951 front/rear sway bars. Have about 65k miles on them, they're stock so based on what Clark's says, they should be 22.5F/18R. $150 for the set shipped. Includes stock drop links and bushings (which should be replaced - not too expensive at Paragon)



16" phone dials - '86 951 early offset. I posted these a couple months ago, had it sold, then the buyer lost his job, so here they are again. Wheels have less than 60k miles on them. Includes Hankook Radial K106 tires with less than 3000 miles (purchased last year) and silver/black center caps. Wheels have some light scuff marks, but no curb rash. Tires are a little rough on the shoulders from a half dozen autocrosses last year. Plenty of tread left. Comfortable, quiet ride, excellent daily driver, but not very sticky for hard track driving (V rated, 340AA rating). Caps are a little age-worn, but still good condition.

Front: 7.0x16-in. wheel with 205/55R-16
Rear: 8.0x16-in. wheel with 225/50R-16

$450 for pickup (SoCal), but open to shipping (not cheap). Detail photos: http://www.thebenspot.com/pics/wheels/



Rear floor mats, black. Had a few years, excellent condition since no one sits in my back seats. $25 shipped



Subwoofer - Used, woofer and grille in excellent working condition. 300W max, sorry I don't know the audio specs. Speaker is 8" diameter, box is 12" high and 16.5" long. $40 shipped



Stainless steel brake lines, teflon lined. I bought these on ebay a few weeks ago, (http://cgi.ebay.com/ebaymotors/Stain...spagenameZWDVW), my mechanic said they were a little long and rubbing on the control arms, so I'm assuming they shipped me lines for an '87- instead of an '86 which has less offset. Bought for $80 incl shipping. I'll sell for $65 shipped. There are 2 at 11" and 2 at 19.75".



Let me know if any questions. Happy holidays!

xsboost90

i think the 86 rear sway was smaller- like 14- may want to get some metric wrenches out and see which one fits over the bar.

roman944

hey, as far as I remember, Pioneer used to make IMPP line of subwoofers, this looks like their older version, great speaker, you could try and take it out of the box and take a look on the magnet for a name and what Ohm they are and how many voice coils - cause it matters, I'm pretty sure its a Single Voice Coil 4ohm sub

gizmozoid

I don't have calipers but eyeballing it against a ruler has the front at 22 and the rear at 17 (did Porsche even have 17s?) I'll try to take some photos and add them here. I'll also check on the sub.

Rob

Front should be 24.5mm solid and rear should be 18mm

ausgeflippt951

^^ yeah what he said.

ibkevin

Good price on the wheels, they should move quick!

gizmozoid

Maybe not that quick!

Anyway, sorry about the delay. Here are the specs on the speaker:
Pioneer TS-W22C
300W Max, 80W nominal
4ohm resistance, 8" diameter



For the swaybars, here are photos. I keep looking at it and the front measures to 22.5mm and rear to 17mm for some reason. Maybe I'm still overloaded on egg nog or something... I'll see if I can get a better ruler, guess I can't trust the tape measure too much.




Brakelines: Asking $65. Make me an offer.

CarbonRevo

Dibs on the floor mats.

Techno Duck

Unless the sway bars were swapped out at some point or your car had the sport suspension option, the '86 951 came with a 24mm front and 18mm rear sway bar.

gizmozoid

Hi Cory, PM'd you back. Mats are yours when you're ready.

Ok, the tape measure sucks. I dug out one of my old engineering scales. Front measures to 22.5mm and rear to 18mm, which is as expected: http://www.clarks-garage.com/shop-manual/susp-15.htm
As far as I know these were stock, I think all the original owner did was install a bunch of alarm systems.

Anyone interested?
Happy new year!

shaynes

Gizmozoid,

The wheels will fit a 87 944 correct? I know that Fuchs will not but certainly these will....?

xsboost90

early offset- they will stick out on late offset.

shaynes

Thanks, it has 15' phone dials, but I have a new set of Cup 1's , so I will just slap them on there...

gizmozoid

Thanks Dan. These are early offset.