plyhammer

I have an automatic trans from an 87 for sale. It has the torque converter and is in good shape. $199 plus shipping. I use freighquote.com and it is usually very reasonable.

I have an auto trans from an 83 for sale. Same as above.

I have a complete engine from an 83 for sale. It is complete from intake to pan and front to back. It even has the flexplate semi attached (I gave up drilling out the last two bolts). It does need a new headgasket. $299 plus shipping.

Anyone local that needs any front or rear suspension stuff I think I have two or three fronts from rotor to rotor including power steering units. $50 a piece

I have two rear suspensions from rotor, trailing arms, torsion bars/tubes, sway bars ect. $50 per.

I have a pair of turbo axles for $75/pair

I have about black front seats that are typical drivers side needs recovered and passenger sides in pretty good shape. $50 shipping per seat

I have two hatches, the first looks real good $75 and the second is still ok, nice upgrade for the 924 $35

I have one white hood with no real damage $20

pair of doors from the same white car $20 a piece

Anyone want a lot of this stuff I am willing to deal. Garage is full and I need room!

Make some offers guys! Need it all gone!

plyhammer

I am located in West Central Ohio 45380

kennycoulter

i am looking for some early car parts.
i need both rear
bumper end caps,
window switch,
the metal right fender flare brace for the front fascia/spoiler.
the plastic left fender flare brace for the front fascia/spoiler,
4 closed end
lugnuts.
looking for a couple of the later model style of defrost vent insert thingies for the dash.
maybe interested in the bolts for the radiator fan,
possibly a head or cam carrier for the right price.....if you wont split up, and you know the engine is good, then i might be interested,
maybe a radiator if its cheap.
rear black carpet f the condition is good.
a windshield if you think you can get it out.
would like to add, if you have a 5 speed flywheel, and also a manual steering rack, i am interested
let me know what you have, and the prices youre lookign to get. thanks for your time.

944J

do you have pics of the good hatch? where are you located?

caster951

He said he is in Ohio.

944CS

interested in the engine...mileage? bent valves?

plyhammer

Engine is mid 100,00's. I drove the car up onto the trailer and that is about it. It sounded fine, I was told by the po that it had the head gasket problem and it looked like milkshake when I drained the oil so that sounds right to me.

plyhammer

Still here,if prices are unfair let me know, I would like this stuff gone. All I have for the time being is the bigger parts that I couldn't ship.

plyhammer

offers?

kennycoulter

have any that are in my list? let me know and just give me a price. i can pick up, im in eastern ohio south of youngstown, by steubenville, 3 hours from columbus, and 40 mins from pittsburgh.

plyhammer

kenny, I have most of that stuff
Not sure if the bumper end caps are the same as a late but if they are, I have a late set
not sure on the window switch, I will check
again, If the bumper stuff is the same early vs late I have the parts. $20
I have a bout a gazzilion stock lug nuts but that is it in the lug dept. free
I have late model dash vents free
I have a head and cam stuff from an 87 NA if tha works. The head has a bent valve I believe. $20 head $20 for cam plus tower.
Again, I do have a radiator but it is for a late model. $50
Had a windshield but couldnt get rid of it at the time and so it went to the crusher
Don't think I have the flywheel

It might take me a while to get some of the stuff off as I haven't been outside in a while. My wfe is pregnant on bedrest and is due in a couple of weeks so I can only go out at night after everyone is asleep. Ply

kennycoulter

thats fine, take your time, and if you can, please set them aside and i can pick them up. my email is drywallkilla@gmail.com if you want to keep in direct contact with me. i have a sort of busy couple weeks coming up, but can plan to come pick up after that(depending on your schedule)

also, you still have the 83 engine? supposed to be in good shape other than headgasket? i might be interested depending on my next couple paychecks....instead of just the head.

plyhammer

Kenny, I do still have the 83 engine (actually I think it is early 85) and Yes, I can confirm that the engine ran, just needs the head gasket. I have it out now and it is pretty much complete from oil pan to manifold.

kennycoulter

p.m. me with your location so maybe we can start planning a pickup for when our schedules are less hectic.