Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

I own it- 944S parts car

Thread Tools
 
Search this Thread
 
Old 04-08-2007 | 10:44 PM
  #16  
yellowline's Avatar
yellowline
Thread Starter
Under the Radar
Rennlist Member
 
Joined: May 2005
Posts: 5,869
Likes: 0
Default

Odometer DOES work, but gauges are tentatively sold. The only reason I suspect inaccurate mileage is because records show the car put on 100 miles in 2 years. However, the odo works and always did for as long as I've known the car.
Old 04-13-2007 | 01:59 PM
  #17  
yellowline's Avatar
yellowline
Thread Starter
Under the Radar
Rennlist Member
 
Joined: May 2005
Posts: 5,869
Likes: 0
Default

Bump. This is ready to go tomorrow if you can PayPal me for tomorrow at 10 AM, so I can pack it and ship before the post office closes at noon. PM me first to confirm.

-Steering wheel. No dye coming off, stitching and leather are intact- $75+ shipping. There was a similar one here for $200 a few weeks back.
-Turn signal, cruise, wipers/headlight washer switchgear. Everything works to my knowledge. $50 + shipping.
-Mirror, hazard, sunroof switches. $25 shipped, each.
-Pair of Clarion 45W speakers- fit in the door, sound nice, $40 + shipping.
-Assorted dash trim, dash vents- contact me.
-87 NA/S/951 owner's manual, no problems with the spine, VG condition overall- $25 shipped
-Metal Master rear brake pads, new in box- $30 + shipping.
-New in bag ATE caliper kits with springs for installing new pads, for all stock 944 NA and S brakes. I have 2- $40 shipped each.

Thanks.
Old 04-24-2007 | 08:11 PM
  #18  
tim944s's Avatar
tim944s
AutoX
 
Joined: Apr 2007
Posts: 11
Likes: 0
From: Edmonton
Default

Hey there. New to the forum, and I saw this post. How much would you be willing to sell a right front fender for? PM would be great.
Old 04-25-2007 | 12:02 AM
  #19  
Gunn E. Slinger's Avatar
Gunn E. Slinger
Intermediate
 
Joined: Mar 2007
Posts: 36
Likes: 0
Default

How is the leather cargo cover for the rear,
also looking for bumper shocks.
Old 04-25-2007 | 12:08 AM
  #20  
yellowline's Avatar
yellowline
Thread Starter
Under the Radar
Rennlist Member
 
Joined: May 2005
Posts: 5,869
Likes: 0
Default

Tim, sorry but I can't PM you right now. You need 3 posts for it to go through.

Gunn, the cargo cover is sold. I have front bumper shocks, and possibly a passenger side rear one. I need the driver's rear one for my own car, and I need to double check that the passenger one is still good. Let me know if I can help.
Old 04-25-2007 | 01:21 AM
  #21  
V2Rocket's Avatar
V2Rocket
Rainman
Rennlist Member
 
Joined: Jan 2007
Posts: 45,595
Likes: 665
From: Nashville, TN
Default

Did the car have a cargo net?
Old 04-25-2007 | 01:39 AM
  #22  
sillbeer's Avatar
sillbeer
Pro
 
Joined: Jan 2006
Posts: 633
Likes: 0
From: Goodyear, Az
Default

What were you thinking of getting for the engine/dme/harness/afm? I've got an '83
Old 04-25-2007 | 09:43 AM
  #23  
tim944s's Avatar
tim944s
AutoX
 
Joined: Apr 2007
Posts: 11
Likes: 0
From: Edmonton
Default

No problem
Old 04-25-2007 | 09:43 AM
  #24  
tim944s's Avatar
tim944s
AutoX
 
Joined: Apr 2007
Posts: 11
Likes: 0
From: Edmonton
Default

I appreciate the response so quickly
Old 04-25-2007 | 09:45 AM
  #25  
tim944s's Avatar
tim944s
AutoX
 
Joined: Apr 2007
Posts: 11
Likes: 0
From: Edmonton
Default

Once again, I think you should be able to pm now? Front right panel? Thx
Old 04-25-2007 | 10:43 AM
  #26  
Zach951's Avatar
Zach951
Advanced
 
Joined: Apr 2007
Posts: 95
Likes: 0
From: Torrington Connecticut
Default

PM sent
Old 05-25-2007 | 09:26 PM
  #27  
yellowline's Avatar
yellowline
Thread Starter
Under the Radar
Rennlist Member
 
Joined: May 2005
Posts: 5,869
Likes: 0
Default

Back from the dead. Got a lot of work done on the car today, and I have this for sale:



It'll be on a pallet and ready to go by the beginning of next week. $1500+freight cost for everything relating to the S engine- DME, harness, AFM, airbox, etc.
Old 05-26-2007 | 07:11 AM
  #28  
billthe3's Avatar
billthe3
Rennlist Member
 
Joined: Aug 2006
Posts: 5,693
Likes: 3
From: Boulder, CO
Default

Originally Posted by V2Rocket_aka944
I was thinking I might fiddle around and try to graft the gauge faces onto my old ones...lol

Or I'll just open up my dash and go crazy with a silver sharpie.
There is no way you'll be able to get the gauge faces off the later style unit. They are all painted on the one piece, so you'd have to cut out each individual gauge face and then put it into your gauges. Not to mention the wiring/lighting and mechanicals.
Old 05-26-2007 | 11:44 AM
  #29  
Zach951's Avatar
Zach951
Advanced
 
Joined: Apr 2007
Posts: 95
Likes: 0
From: Torrington Connecticut
Default

87 NA/S/951 owner's manual, no problems with the spine, VG condition overall- $25 shipped


Interested in the above... PM me and I will Paypal you right back with address and money.
Old 05-26-2007 | 12:28 PM
  #30  
greenshoes3's Avatar
greenshoes3
Pro
 
Joined: Sep 2005
Posts: 503
Likes: 0
From: Lake Tapps, WA
Default

oh god, i would love to buy all of the rear end of the drivetrain, but im buying a wrx soon


Quick Reply: I own it- 944S parts car



All times are GMT -3. The time now is 05:38 AM.