Ninefofo got some new kicks...
03-22-2007, 12:18 AM
#16
Hey Man
Rennlist Member
Rennlist Member
Originally Posted by Ninefofo
It is deck/diamond plate. I eliminated the center speaker control and the stock carpet looked like ***. So, I had this piece of aluminum diamond plate laying around.... A piece of black burlwood will get in there eventually.
03-22-2007, 12:36 AM
#17
Official Rennlist
Borat Impersonator
Rennlist Member
Borat Impersonator
Rennlist Member
Originally Posted by Ninefofo
...I have Rennbay's Super Deluxe Ball Joint kit en route...
Your car has the early steel control arms right?
You can just go down to your FLAPS and get the correct ball joints for about $40 and swap them in for your old ones.
About 3 hrs work, tops...
03-22-2007, 12:50 AM
#18
Nordschleife Master
Thread Starter
Originally Posted by Airflite40
I thought Rennbay's kit is for later aluminum control arms?
Your car has the early steel control arms right?
You can just go down to your FLAPS and get the correct ball joints for about $40 and swap them in for your old ones.
About 3 hrs work, tops...
Your car has the early steel control arms right?
You can just go down to your FLAPS and get the correct ball joints for about $40 and swap them in for your old ones.
About 3 hrs work, tops...
03-22-2007, 12:50 AM
#19
Nordschleife Master
Thread Starter
Originally Posted by U-30AT
hey hows about a side shot so as to see the wheel well fill..am curious as to how the 50 series compare to the stock 60's looks wise.
03-22-2007, 12:51 AM
#20
Nordschleife Master
Thread Starter
Originally Posted by KuHL 951
Is that the car the new steering wheel is going on?
03-22-2007, 12:59 AM
#22
Nordschleife Master
Thread Starter
Thanks, I swapped legoland951 some BBS and cash for those. I love them. I am going to look at some 930 wheels this weekend (late/16 inch/BBS). I cannot wait to see your car finished. Did you get the sender for that 10 bar?
03-22-2007, 01:02 AM
#23
Official Rennlist
Borat Impersonator
Rennlist Member
Borat Impersonator
Rennlist Member
no, I was actually able to get a 5-bar black/white one.
The 10 bar is sitting on a shelf waiting for the next lister that might need it.
The clock fell from the same shelf and broke....
But its all good, since I found a volt guage to put in place of it.
mmmmmm....Fuchs.....[droool]
The 10 bar is sitting on a shelf waiting for the next lister that might need it.
The clock fell from the same shelf and broke....
But its all good, since I found a volt guage to put in place of it.
mmmmmm....Fuchs.....[droool]