jeeper31

Putting in a vac/boost gauge but want to add another one. What other type of gauge is real easy to install/hook up? I don't feel like going through any major projects.

TIA

SD Porsche Fan

a/f mix is fairly easy. Just tap in to the signal wire from your O2 sensor and power.

jeeper31

Any others?

bearone

you really need to figure out what info you want to see.
to add another gage for the sake of, just adding a gage is a waste of time/money.

87951

jeeper31

true. unless i have a gauge panel with 2 holes.

bearone

then you lock yourself into something that will fit as opposed to a gage that can provide some real info.

87951

Dave951M

af meter and a matching VDO clock.

SamGrant951

My vote would be oil temp since you said ease of install but wideband 02 if you are adding boost/fuel

jeeper31

Adding a boost/vac gauge. What good would the wideband O2 be if I have no control over the boost/mixture?

SamGrant951

Thats why I said if you are upping the boost and/or tuning the a/f. I have no idea what mods you have or plan on having so I just threw that in there...

jeeper31

I have a stock '88 Turbo S with a Lindsey Boost Enhancer. I am thinking about chipping the car but not sure yet. Everything else is stock.

SamGrant951

Its always nice to know the a/f ratio - especially when adding chips, but if you are looking for an easy gauge that I feel is worthwhile/informative = oiltemp.

Kurt R

Have you seen Veloce Raptor's avatar?

UncleMaz

I put in a narrow band because it was cheap, filled a hole, easy install and wasn't a drain on the battery like the clock. If I didn't put that, I would have put an ammeter. In my case, I might have saved the cost of a battery or two.

arbeitm

How about a gauge that tells you how much money you sink into your car. Is there one like that available?