Sergey's droplinks needed........
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I guess he's sold out of them, so if anyone has an extra unused set laying around please drop me an email: shelbyracers at provide dot net
Thanks,
Brian
Thanks,
Brian
#6
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's an old thread that about spawned this:
https://rennlist.com/forums/924-931-944-951-968-forum/172767-swaybar-drop-link-length.html
The part numbers to order them from McMaster-Carr are at the bottom.
If you want to get fancier ones (coated, stanless, whatever) then please do. The basic idea is a four 10mm rod ends. One pair being male threads and one pair female. The trick is that the hole size for spherical rod ends is almost always the same size as the threaded fitting. The bolts to the frame (on the adjusters) are 10mm. You might want some washers. Enjoy!
https://rennlist.com/forums/924-931-944-951-968-forum/172767-swaybar-drop-link-length.html
The part numbers to order them from McMaster-Carr are at the bottom.
If you want to get fancier ones (coated, stanless, whatever) then please do. The basic idea is a four 10mm rod ends. One pair being male threads and one pair female. The trick is that the hole size for spherical rod ends is almost always the same size as the threaded fitting. The bolts to the frame (on the adjusters) are 10mm. You might want some washers. Enjoy!
#7
Set to Full-Auto
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Forget washers - that's mickey mouse **** right there - I had made some CNC 6061 aluminum bushings for Serge last time round. If someone gets these things going again, I can always make another batch of bushings........
Trending Topics
#8
Hey Man
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Serge doesn't lurk here much but I'll talk to him tomorrow at work. I picked up a 2nd set about 3 weeks ago and he was sold out. I think he waits until he has at least 10 orders; starving student syndrome!
#10
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I did it with just some washers. Works great. The angle isn't an issue, really.
"Mickey mouse ****?" It's hard to be helpful when there are so many smart *** punks on this board.
"Mickey mouse ****?" It's hard to be helpful when there are so many smart *** punks on this board.
#12
Set to Full-Auto
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Haha, I'm just joking - and I DID offer to make better parts...............
If anyone has a set of Serge's links they bought before I made the bushings I will be happy to provide them - I have some leftovers.
If anyone has a set of Serge's links they bought before I made the bushings I will be happy to provide them - I have some leftovers.
#14
RL Community Team
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have a set of Serge's droplinks that I never used. I've been meaning to sell them. I think mine were like $42 shipped or something... Would I be dreaming if I wanted $39 shipped?