Mobil 1 is NOT pure synthetic anymore...
#1
Rennlist Member
Thread Starter
Mobil 1 is NOT pure synthetic anymore...
I'm sure you're all wondering if I've been into the happy juice...but I also hang out over on http://www.bobistheoilguy.com. It's a forum for oil gurus to discuss what's happening in the fluids world.
There is basically a tornado of information flurrying about over on that forum about this. I read all the threads and then posted some questions to clarify the facts. Here's the skinny: Mobil 1 used to be a pure synthetic oil, using Group IV and V oils as the base formula, then adding the additives needed. Now Mobil 1 is using Group III oils as a base. Group III oil is based on DINO oil, not synthetic.
Yes, it's true and my Mobil 1 religious boots are shaking also...
If you call or write Mobil 1 you will just get a wiggly answer if you specifically ask them. The oil community over on that forum is FURIOUS to say the least...and remember that fluid engineers that do this for a living hang out there. A couple of the folks even called friends that work at Mobil 1. So I give a LOT of value to the info from there.
Here's my post over there with their answer:
Newbie Layman here with some questions.
I've read this and the other threads on this issue and I'm shaking in my M1 15w-50 shoes here folks!
I'm a Porsche nut, my current one is a 93 968 - 3.0 ltr 4 cylinder engine and I live in south texas (can you say HOT!) and I drive my car hard in the heat. I've been using M1 15w-50 in my Porsche's over the years...now I have doubts...
1. Are there any true Gp IV synthetics out there? If so, names please.
2. I change my oil and filter every 5K - so does me worrying about 15w-50 having gpIII a moot point?
I'm also the local Porsche club President and so a lot of folks tap me for advice...
3. So what should a Porsche owner be using?
Their answers:
...sasilverbullet, if you want some of the finest ("thick") brews for racing and will shell out some $$, try M1 V-Twin 20W-50 motorcycle oil. Additive levels in M1 15W-50 EP are not as high as they used to be. Will it make a difference? I dunno but why risk it is my belief when you have an awesome engine like you do.
...Since there aren't a lot of low cost (and easily available) synthetic Xw50 options out there, I'd say to keep using it, but perhaps you should convince the Porsche guys to begin doing UOAs right away, so that they can compare the stuff they are running now, to any future formulations of it. Then if they notice a drastic change, they can look into other options. And if things stay relatively the same, then they can keep using the product with confidence.
...You don't need to abandon the M1 15W-50 from a performance standpoint based on Group III content. Performance is not the motivation of the recent M1 controversy. If you feel you've been deceived and gouged upon in reliance, that's an altogether different reason.
...Another old school synthetic to consider if you do change would be Redline. This is the top oil in my opinion for difficult thermal loads. The price gap between it and the most expensive OTCs has narrowed, making it a better value than it once was. If you're not tracking it, other oils like GC or even Delvac 1 come to mind, although the first may be too thin and the latter is likewise an EM product.
...and still probably the finest HDEO available looking at the available evidence.
...Doug Hillary, an ex and long time poster on here with very good industry credentials used it in his old 928 and has seen it used in multiple Porsche applications with success.
There is no reason to believe this formula has changed considering it is used at up to 100,000km/60,000 mile OCI's in over the road trucking.
There is basically a tornado of information flurrying about over on that forum about this. I read all the threads and then posted some questions to clarify the facts. Here's the skinny: Mobil 1 used to be a pure synthetic oil, using Group IV and V oils as the base formula, then adding the additives needed. Now Mobil 1 is using Group III oils as a base. Group III oil is based on DINO oil, not synthetic.
Yes, it's true and my Mobil 1 religious boots are shaking also...
If you call or write Mobil 1 you will just get a wiggly answer if you specifically ask them. The oil community over on that forum is FURIOUS to say the least...and remember that fluid engineers that do this for a living hang out there. A couple of the folks even called friends that work at Mobil 1. So I give a LOT of value to the info from there.
Here's my post over there with their answer:
Newbie Layman here with some questions.
I've read this and the other threads on this issue and I'm shaking in my M1 15w-50 shoes here folks!
I'm a Porsche nut, my current one is a 93 968 - 3.0 ltr 4 cylinder engine and I live in south texas (can you say HOT!) and I drive my car hard in the heat. I've been using M1 15w-50 in my Porsche's over the years...now I have doubts...
1. Are there any true Gp IV synthetics out there? If so, names please.
2. I change my oil and filter every 5K - so does me worrying about 15w-50 having gpIII a moot point?
I'm also the local Porsche club President and so a lot of folks tap me for advice...
3. So what should a Porsche owner be using?
Their answers:
...sasilverbullet, if you want some of the finest ("thick") brews for racing and will shell out some $$, try M1 V-Twin 20W-50 motorcycle oil. Additive levels in M1 15W-50 EP are not as high as they used to be. Will it make a difference? I dunno but why risk it is my belief when you have an awesome engine like you do.
...Since there aren't a lot of low cost (and easily available) synthetic Xw50 options out there, I'd say to keep using it, but perhaps you should convince the Porsche guys to begin doing UOAs right away, so that they can compare the stuff they are running now, to any future formulations of it. Then if they notice a drastic change, they can look into other options. And if things stay relatively the same, then they can keep using the product with confidence.
...You don't need to abandon the M1 15W-50 from a performance standpoint based on Group III content. Performance is not the motivation of the recent M1 controversy. If you feel you've been deceived and gouged upon in reliance, that's an altogether different reason.
...Another old school synthetic to consider if you do change would be Redline. This is the top oil in my opinion for difficult thermal loads. The price gap between it and the most expensive OTCs has narrowed, making it a better value than it once was. If you're not tracking it, other oils like GC or even Delvac 1 come to mind, although the first may be too thin and the latter is likewise an EM product.
...and still probably the finest HDEO available looking at the available evidence.
...Doug Hillary, an ex and long time poster on here with very good industry credentials used it in his old 928 and has seen it used in multiple Porsche applications with success.
There is no reason to believe this formula has changed considering it is used at up to 100,000km/60,000 mile OCI's in over the road trucking.
#7
Instructor
Join Date: Oct 2006
Location: State College, PA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
I'm so confused...
From the FAQs on Mobil1.com:
Is Mobil 1 with SuperSyn Technology a fully synthetic motor oil?
Yes, it is. To meet the demanding requirements of today's specifications (and our customers' expectations), Mobil 1 with SuperSyn uses high-performance fluids, including polyalphaolefins (PAOs), along with a proprietary system of additives. Each Mobil 1 with SuperSyn viscosity grade uses a unique combination of synthetic fluids and selected additives in order to tailor the viscosity grade to its specific application.
Did they just not update the website since they changed their formula?
From the FAQs on Mobil1.com:
Is Mobil 1 with SuperSyn Technology a fully synthetic motor oil?
Yes, it is. To meet the demanding requirements of today's specifications (and our customers' expectations), Mobil 1 with SuperSyn uses high-performance fluids, including polyalphaolefins (PAOs), along with a proprietary system of additives. Each Mobil 1 with SuperSyn viscosity grade uses a unique combination of synthetic fluids and selected additives in order to tailor the viscosity grade to its specific application.
Did they just not update the website since they changed their formula?
Trending Topics
#9
Under the Radar
Rennlist Member
Rennlist Member
Join Date: May 2005
Posts: 5,869
Likes: 0
Received 0 Likes
on
0 Posts
...You don't need to abandon the M1 15W-50 from a performance standpoint based on Group III content. Performance is not the motivation of the recent M1 controversy. If you feel you've been deceived and gouged upon in reliance, that's an altogether different reason.
#11
Addict
Rennlist Member
Rennlist Member
Join Date: Nov 2002
Location: right next to the right one
Posts: 2,486
Likes: 0
Received 1 Like
on
1 Post
Lubracation Engineers 8450 Monolec Single Grade (50)
http://www.le-inc.com/products.jsp?productID=158
http://www.le-inc.com/products.jsp?productID=158
Last edited by schnellfahrer; 11-14-2006 at 05:51 PM.
#12
Rennlist Member
Thread Starter
GeneralTso - in one of the threads they brought that up. When EM (exxonmobil) was asked directly if they use some group III, they wouldn't give a exact answer, only wiggle words.
I'd suggest you go to www.bobistheoilguy.com and read the posts on the general forum about this. They're an eye opener to say the least.
I'd suggest you go to www.bobistheoilguy.com and read the posts on the general forum about this. They're an eye opener to say the least.
#13
Done With Sidepatch
Rennlist Member
Rennlist Member
Went to pick up some M1 15W50 and was SOL. The only M1 I could find was 5W50...and I tried a couple of places. Moot point now as my ride is sporting a fresh coat of 5w50 for thw winter
#15
Race Car
years ago I was crew on a race team('92 911 turbo) in the IMSA supercar series. We were sponsered by valvoline and that is what we ran-it was free. However we all were sceptics having used mobile in race cars and streetcars with great results. We were pleasantly surprised to see that the Valvoline full syntheteic held up great. Our oil temps held as they did with mobile(before valv. sponsership) and we never had a problem. I still use mobile in everything I own. I really don't want to start dropping $$$$$ for exotic stuff in my street cars, but if there is an alternative would love to know. Amsoil???