Stuff FS!!!!!!- need some room in the attic
11-07-2006, 08:34 PM
#1
Rennlist Member
Thread Starter
New years blowout sale- this stuff needs to leave!!!!!
complete pair of front struts(black)/springs/early mounts from 86 turbo w/ 50K on it... $75!!!!!
one set of used ignition wires w/ 40k on them from my turbo- look good worked fine-replaced w/ magnacors-$10
pair of 86 turbo spindles- $40!!!!
turbo front rotor dust shields- $15
Pair of turbo cooling fins-bolt to the strut- $15 w/ the bolts!!!
n/a spare tire from my 89 awsome shape- $20
n/a oil cooler and housing- $20- from 87 924s
early gauge surrounds- black and one silver- $10 each
s2 radiator- pressure tested, has a slight bow to the bottom but pressure tests fine- $35
2.7/2.5 crank- needs polished due to rod bearing but would work fine for oversize bearing- $40
full set of early gauges w/ surround for 77-82 924- will not work in 924s!- $50
black e-brake handle- $15
turbo/late dash gauge surround- $15
late dash trim around headlite switch-i have two- $5 each
late dash trim around ignition AND column(non airbag)-$5 either
black ds mirror minus glass from rocks car- $10
2X leaky racks from 86 turbos/no outer tie rods on one of them- $make offer$ rebuildable
set of n/a calipers/spindles/ hubs from 85.5 n/a aka tifos car- $40 for all
86 turbo engine cradle between frame rails- $30
Black late wheel- alittle dry and rough but no rips, stitching still good- $20 w/ horn button!
S2 throttle cable assy- $10
oil pressure sender for late dash- $30
pwr steering and a/c belt adjustment turnbuckles- $15 each...
many bumper shocks for n/a or turbo rear bumper- $20 a set
Everything is OBO + shipping thanks
one set of used ignition wires w/ 40k on them from my turbo- look good worked fine-replaced w/ magnacors-$10
pair of 86 turbo spindles- $40!!!!
turbo front rotor dust shields- $15
Pair of turbo cooling fins-bolt to the strut- $15 w/ the bolts!!!
n/a spare tire from my 89 awsome shape- $20
n/a oil cooler and housing- $20- from 87 924s
early gauge surrounds- black and one silver- $10 each
s2 radiator- pressure tested, has a slight bow to the bottom but pressure tests fine- $35
2.7/2.5 crank- needs polished due to rod bearing but would work fine for oversize bearing- $40
full set of early gauges w/ surround for 77-82 924- will not work in 924s!- $50
black e-brake handle- $15
turbo/late dash gauge surround- $15
late dash trim around headlite switch-i have two- $5 each
late dash trim around ignition AND column(non airbag)-$5 either
black ds mirror minus glass from rocks car- $10
2X leaky racks from 86 turbos/no outer tie rods on one of them- $make offer$ rebuildable
set of n/a calipers/spindles/ hubs from 85.5 n/a aka tifos car- $40 for all
86 turbo engine cradle between frame rails- $30
Black late wheel- alittle dry and rough but no rips, stitching still good- $20 w/ horn button!
S2 throttle cable assy- $10
oil pressure sender for late dash- $30
pwr steering and a/c belt adjustment turnbuckles- $15 each...
many bumper shocks for n/a or turbo rear bumper- $20 a set
Everything is OBO + shipping thanks
Last edited by xsboost90; 11-28-2006 at 10:45 PM.
11-07-2006, 08:45 PM
#2
Intermediate
Join Date: Jul 2006
Location: Beavercreek, OH
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
PM Sent on the early gauge surrond.
Originally Posted by xsboost90
pair of front struts(black)/springs/early mounts from 86 turbo w/ 50K on it... $100
Pair of turbo cooling fins-bolt to the strut- $20
pair of LATE upper strut mounts from 968-same as late n/a or turbo-$50
n/a spare from my 89- $25
one piece x-over- make offer
complete turbo oil cooler system- housing/lines/ cooler-missing small spacer that goes between the block and the housing i used that - $150-
n/a oil cooler and housing- $30 from 87 924s
early gauge surrounds- black and one silver- $10 each
narrow band a/f gauge- $10
i'll add some more here in a bit...gotta look through the stash...Dan.
Pair of turbo cooling fins-bolt to the strut- $20
pair of LATE upper strut mounts from 968-same as late n/a or turbo-$50
n/a spare from my 89- $25
one piece x-over- make offer
complete turbo oil cooler system- housing/lines/ cooler-missing small spacer that goes between the block and the housing i used that - $150-
n/a oil cooler and housing- $30 from 87 924s
early gauge surrounds- black and one silver- $10 each
narrow band a/f gauge- $10
i'll add some more here in a bit...gotta look through the stash...Dan.
Trending Topics
11-07-2006, 10:38 PM
#8
Rennlist Member
Damn, I need the crossover pipe, but just had to put a deposit on my house for next year. Just curious about what were you wanting to get for it? I might sell a car over thanksgiving break and have money.
11-07-2006, 11:04 PM
#10
Nerd Herder
Rennlist Member
Rennlist Member
I need a set of the visor clips Danny! How's next weekend look for a pickup?
How's your stock of 924S rear bumper pads?
How's your stock of 924S rear bumper pads?
11-07-2006, 11:45 PM
#12
Nerd Herder
Rennlist Member
Rennlist Member
anytime this Sat, flying to Mexico sunday for work. otherwise, it'll wait a week and a half- whatever works for you. I'm in Cinci this week so maybe a weeknight?
