tobyport

Which 16" phone dials do I need for a 1989 951? Part numbers? Offsets? Anyone have a set for sale? Thanks.

GOBOGIE

Why would you put a set of phone dials on an '89? Just curious? Not that phone dials are bad :-)

Legoland951

There were no 16x9 phone dials as far as I know to replace the rears for an 89. Otherwise, any 87+ 16" phone dials will fit.

black944 turbo

You just 87+ turbo phones. You will be stepping down to 7/8 in wide wheels from the factory turbo S wheels.

Epic2112

As far as I know, Phone Dials will not fit over the brakes in the front. That is why Phone Dials were not availible from the factory in 89.

Legoland951

I have never tried the fronts so I am not sure if the fronts will fit. Has anyone tried it?

tobyport

I want the phone dials b/c I like the way they look...most of the time....just seeking variety! I thought that I had seen a set on a Turbo S, but maybe not....was hoping someone else had tried this fitament. Call me crazy, but I like the phone dials!

Legoland951

I have a set of phone dials if you want to trade...

tobyport

No, I don't care to trade. I should have named the thread "show me your alternative to the factory Turbo S wheels." OK fellow Turbo S owers, SHOW ME YOUR WHEELS!

black944 turbo

I have a standard Turbo but I have to say that one of my favorite wheels are C2 turbos. Here is a pic of mine and I know they will fit on an S. I also have a set of early phone dials, which in my opinions look a lot better than the late ones because they have a left, unfortunately you can only run them on 1986 cars.

ubercooper

no, they did have phone dials in 89, my 944 has them. and they are stock

tobyport

ubercooper, do you know the offsets? I would think that I could use spacers and possibly clear the turbo brakes? no?

Epic2112

NA or turbo? Phone dials do not fit over M030 brakes.

http://members.rennlist.com/951_race...tockSizes.html

SpecialtyConcreteCoatings

(...edited...)

MPD47

If you plan on selling stuff on the board, become a member.