951 Transmission won't shift into 5th or Reverse
#1
951 Transmission won't shift into 5th or Reverse
I have a "project" tranny that I just bought on Ebay. The tranny I bought won't shift into 5th or Reverse. It supposedly shifts fine into the other gears. Its a 951 non-lsd tranny. I only paid $100 for it and want to use it as a learning tool. I do VW transmissions now.
It seems like its probably shfter fork or something else in the internal shifter mechanism. Is this a common failure? What are the likely causes?
Thanks, John
It seems like its probably shfter fork or something else in the internal shifter mechanism. Is this a common failure? What are the likely causes?
Thanks, John
Trending Topics
#13
There is an large exterior bolt (on top) that can become loose in transit or normal use. If it gets backed off past a certain point the lever for 5th and reverse flips over and you have to remove the rear section. This screw was finger tight on a 951 trans I sold. I told the buyer, "Whatever you do, do not remove this large bolt with the car out of gear" I see a post that night, curiosity killed the cat and he ended up having to drop the trans one more time.
#14
Whoa, Steve. What bolt is this? The 13mm nut on top, the 17mm on the other side of the 13mm nut?? The small 10mm ?? The 17mm on the side of the 13mm nut? Sorry I can't give better descriptions but I am not going to be pleased to drop the trans. I didn't remove any bolts.
#15
Originally Posted by Mike Markota
Whoa, Steve. What bolt is this? The 13mm nut on top, the 17mm on the other side of the 13mm nut?? The small 10mm ?? The 17mm on the side of the 13mm nut? Sorry I can't give better descriptions but I am not going to be pleased to drop the trans. I didn't remove any bolts.