FS: 968 Wing
#17
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: Mar 2005
Location: Houston
Posts: 3,619
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know the price on those trim pieces? That way an interested buyer can know what they are getting into.
Still $500/ best. No interest so far.
Still $500/ best. No interest so far.
#18
Three Wheelin'
I've had a difficult time finding the trim pieces. I hunted down a fabricator that used to make the replica wing for 944s and he wanted ~250 for just one of the side trim pieces. I was discussing this with Konstantin a while back and he mentioned that I may be able to get all of the factory trim pieces for that price. I didn't follow up, but he may be someone to ask.
#19
Drifting
Does anyone have pics of the rear hatch with the 968 trim pieces installed WITHOUT the 968 wing? The rear 968 trim piece seems to form a lip spoiler that just might look good by itself. Or does anyone know if the trim pieces have holes that would be exposed without the 968 wing installed?
Thanks.
Thanks.
#21
Rennlist Member
The trim pieces alone would not look right (bad/incomplete) without the wing.
I dont know what the side pieces are, but the center triim piece under the wing is big bucks from a dealer. I looked into getting the S2 part without the 3rd tail light cutout, and I recall it was $500-800. I could be wrong, but I remember it was high enough that I would never consider buying it even with the discounted mailorder prices and the $100 PCA coupon.
I dont know what the side pieces are, but the center triim piece under the wing is big bucks from a dealer. I looked into getting the S2 part without the 3rd tail light cutout, and I recall it was $500-800. I could be wrong, but I remember it was high enough that I would never consider buying it even with the discounted mailorder prices and the $100 PCA coupon.
#23
Originally Posted by thingo
The holes do match up, the wing itself bolts on to the hatch, the other three pieces are only there to cover the fixings, you need brackets for the piece under the wing.
#25
Addict
Rennlist Member
Rennlist Member
LOL, I was just fitting up the 968TRS adjustable wing on the Project tonight. I had the side mouldings sitting around that I picked up a few years ago. I don't have the center trim piece tho. I was thinking about making one, after seeing the price... thinking turned into definately making one.
#28
Nerd Herder
Rennlist Member
Rennlist Member
Originally Posted by tedwright
No interest what-so-ever.
Some tire-kickers but that is it.
$399.99 takes it. In a few days, I will throw it on eBay.
Some tire-kickers but that is it.
$399.99 takes it. In a few days, I will throw it on eBay.
You mean "fin kickers"? spoilers?
399?? That a buy- Too bad it would look silly on a 924S. If you could wait until April, you could sell that in Hershey in 20 minutes for 500 bucks.
best of luck Ted. And congrats on the beautiful 968. Gorgeous color.
#29
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: Mar 2005
Location: Houston
Posts: 3,619
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Chris_924s
You mean "fin kickers"? spoilers?
399?? That a buy- Too bad it would look silly on a 924S. If you could wait until April, you could sell that in Hershey in 20 minutes for 500 bucks.
best of luck Ted. And congrats on the beautiful 968. Gorgeous color.
399?? That a buy- Too bad it would look silly on a 924S. If you could wait until April, you could sell that in Hershey in 20 minutes for 500 bucks.
best of luck Ted. And congrats on the beautiful 968. Gorgeous color.
I know as soon as I sell it, I will get about a dozen PMs asking if I still have it saying they will pay $500 LOL!
#30
On my original hatch I used this thick rubber tape(side molding) I had laying around the shop. It was flexible enough to go around the corners and looked factory, that is if you didn't know what the factory look was. I no longer have this since some punks smashed out my back window and ruined the hatch. I found the tape in the back of my shop. I have no idea where it came from or who made it. I think it was something leftover from the 80's.
I know this doesn't help much but may give people ideas of something other then the stock trim that can look really nice.
I know this doesn't help much but may give people ideas of something other then the stock trim that can look really nice.