ChicagoLand Wrenching Party?
#16
Thread Starter
Jane Bond 007
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2002
Posts: 9,773
Likes: 28
From: North of the GTA
Originally Posted by azmi951
Michelle, Look up J_Kapp, he just joined. He lives in the Chicago area and needs a good mentor, he is picking up his 951 over memorial day.
#20
Originally Posted by MichelleJD
I was thinking the weekend after Labor Day - what is that - 10th and 11th?
Please keep us informed.
Lee
#22
Thread Starter
Jane Bond 007
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2002
Posts: 9,773
Likes: 28
From: North of the GTA
Originally Posted by Lead Foot 944
Weekend after I see......Michelle if you can and I stay in town, you should try to come up this labor day to mount that dam spoiler.....
DAmian
DAmian
#27
Thread Starter
Jane Bond 007
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2002
Posts: 9,773
Likes: 28
From: North of the GTA
I've got two torque wrenches: one click type and one with a dial. Click type has not been calibrated, but it's only been used on my rebuild. The dial one is 1/2", not sure how low it goes.
#28
Should be adequate, I have a 3/8 Click torrque wrench that goes down to 20ft/lbs and a 1/4" torque wrench that goes up to 200in/lbs....great for stuff with a 15ft/lbs spec. Both have been calibrated recently year. What do the 12pt bolts on the CV's have to be torqued too?
#30
Thread Starter
Jane Bond 007
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2002
Posts: 9,773
Likes: 28
From: North of the GTA
I talked to SenseiMary today and we may be up to treating next weekend's attendees to pre-Renntreffen jello shots and then swearing everyone to secrecy.