Need Help with Sway Bars
06-20-2005, 12:19 AM
#1
Track Day
Thread Starter
Join Date: Jan 2005
Location: Brisbane, Australia
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Need Help with Sway Bars
Hi Guys,
I'm currently considering upgrading the sway bars on my 944S2. Unfortunately the very high freight costs rule out the good gear available from the US and so I am looking at a local manufacturer (K-Mac) who will take my bars and make up a 27mm or 30mm solid front and 19mm solid rear for me. My S2 has the standard factory 26.8mm hollow front and 16mm solid rear so could anyone offer me some advice regarding the front bar, should I go with the 27mm or 30mm solid? The car has Paragon cut and shut Konis front and rear and stock springs / torsion bars. Thanks.
I'm currently considering upgrading the sway bars on my 944S2. Unfortunately the very high freight costs rule out the good gear available from the US and so I am looking at a local manufacturer (K-Mac) who will take my bars and make up a 27mm or 30mm solid front and 19mm solid rear for me. My S2 has the standard factory 26.8mm hollow front and 16mm solid rear so could anyone offer me some advice regarding the front bar, should I go with the 27mm or 30mm solid? The car has Paragon cut and shut Konis front and rear and stock springs / torsion bars. Thanks.
