Has anyone self-installed their Wilk board?
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
About to receive the adapter and powerprom chip...just got the instructions...I can see I'll have to lock myself in my shop for 3 hours with no kids! Anyone already done this that might have some additional advice?
TIA
Joe
TIA
Joe
#2
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
http://clarks-garage.com/shop-manual/dme-02.htm
That should help you out a bit too. Just be VERY careful with the chips, take them out by prying up both ends at the same time, or each end a tad at a time.
That should help you out a bit too. Just be VERY careful with the chips, take them out by prying up both ends at the same time, or each end a tad at a time.
#3
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks....looks like that's for the 85.5 up...which already have a socketed board....I am talking about the actual soldering in of the adapter which allows for mod chips