car pulls to the left
#1
Race Car
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
got a front wheel alignment today but the car still pulls to the left. alignment specs:
camber: left: -1.9 right -2.4
toe out: 1/16" total
caster: -2.6 left and right
so the left side was unable to get any more negative camber than -1.9. i have the paragon ARHK, lowered about 2" with the rennbay extended ball joint pin. six weeks ago i changed the front rotors and pads and lines. the car still pulls slightly to the left while driving despite the alignment, and braking makes no difference on pull.
i'm thinking i may have tightened the front wheel bearing too tight. alternatively, the front brake may be dragging, but why would this occur and how do i detect it? any thoughts?
camber: left: -1.9 right -2.4
toe out: 1/16" total
caster: -2.6 left and right
so the left side was unable to get any more negative camber than -1.9. i have the paragon ARHK, lowered about 2" with the rennbay extended ball joint pin. six weeks ago i changed the front rotors and pads and lines. the car still pulls slightly to the left while driving despite the alignment, and braking makes no difference on pull.
i'm thinking i may have tightened the front wheel bearing too tight. alternatively, the front brake may be dragging, but why would this occur and how do i detect it? any thoughts?
#2
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Jack the front and give the wheels a spin. I doubt that's the case.
Soft tire on the left?
Bad rear alignment?
Parking brake dragging?
Tires worn funny?
Soft tire on the left?
Bad rear alignment?
Parking brake dragging?
Tires worn funny?