picture of spare, jack and tool kit in the car
#1
Burning Brakes
Thread Starter
Join Date: Nov 2003
Location: The Colony, TX
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
does anyone have a picture of how to get the spare tool kit and jack in the car and not rattling?
#2
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sorry I can't help you.
But what would be interesting is a poll of just how many actually have a spare, jack and tool kit, much less an inflator.
I've never had all four in one car.
Good luck.
But what would be interesting is a poll of just how many actually have a spare, jack and tool kit, much less an inflator.
I've never had all four in one car.
Good luck.
#3
Burning Brakes
Join Date: Jun 2004
Location: NorCal (school) /SoCal (summer)
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Was the spare, jack, tool kit and inflator kit all standard equipment on 944s?
As far as I know, the spare and jack located in my car are original and unused. I also found the inflator down in the passenger side rear wheel well, but I don't recall ever seeing a tool kit.
As far as I know, the spare and jack located in my car are original and unused. I also found the inflator down in the passenger side rear wheel well, but I don't recall ever seeing a tool kit.
#6
Banned
Join Date: Feb 2004
Location: In self-imposed exile.
Posts: 14,072
Likes: 0
Received 8 Likes
on
7 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Same here. Tire goes in the middle well with the screw thingy keeping it from bouncing around. Jack has to be opened up and slid backwards onto the "L"-shaped bracket between the taillights, then tightened down to hold it in place. The Jack handle goes over two notches in the same bracket. Tool kit & compressor go in the side pockets AFAIK, or in the spare tire well if you prefer I guess.
Trending Topics
#8
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by 35thSLP
so where did all the compressors go? and can I still buy one?
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
#10
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Make sure your inflatble tire actually works. The valve is fairly vulnerable and tend to leak. I learnt a hard lesson when I had a flat on the freeway, and the inflatable spare did not work. The tire shop says valve is a unique design and hard to replace.
#13
Racer
Join Date: Nov 2004
Location: Manchester, New Hampshire
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've got all four. New spare, mint compressor, decent tool-kit and chinsy aluminum jack.
The jack sucks. The handle bent up the first time I tried to use it. Luckily I kept the nice solid jack from the 924S...it's much better. Doesn't fit the jacking hole on the '44 properly, but it still grabs well enough to do a tire change.
Jeremy
The jack sucks. The handle bent up the first time I tried to use it. Luckily I kept the nice solid jack from the 924S...it's much better. Doesn't fit the jacking hole on the '44 properly, but it still grabs well enough to do a tire change.
Jeremy